Home Articles FAQs XREF Games Software Instant Books BBS About FOLDOC RFCs Feedback Sitemap
irt.Org

Request For Comments - RFC1214

You are here: irt.org | RFCs | RFC1214 [ previous next ]






Network Working Group                                 L. Labarre, Editor
Request for Comments: 1214                                         MITRE
                                                              April 1991


          OSI Internet Management: Management Information Base

Status of this Memo

   This RFC specifies an IAB standards track protocol for the Internet
   community, and requests discussion and suggestions for improvements.
   Please refer to the current edition of the "IAB Official Protocol
   Standards" for the standardization state and status of this protocol.
   Distribution of this memo is unlimited.

Abstract

   This RFC documents a MIB for use with CMIP, either over pure OSI
   stacks or with the CMIP over TCP specification.  It redefines objects
   comprised by the second revision of the Management Information Base
   for Network Management of TCP/IP-based internets: MIB-II so as to
   conform to the OSI structure of management information.  This
   document is a product of the IETF OIM working group.

Table of Contents

   1. Introduction................................................    2
   2. Additions to MIB-II.........................................    3
   2.1 Structure of the OIM Subtree...............................    3
   2.2 Supporting ISO Definitions.................................    3
   2.3 Additions for Object Instance Identification...............    4
   2.3.1 Distinguished Names......................................    4
   2.4 Events.....................................................    5
   2.5 Containment (Naming) Tree Definition.......................    5
   2.6 Changes from RFC 1158......................................    6
   3. Format of OSI Templates.....................................    7
   4. Object Class Definitions....................................    7
   5. Attribute Definitions.......................................   16
   6. Notifications...............................................   44
   7. The Containment Hierarchy...................................   45
   8. ASN.1 Definitions...........................................   49
   9. Acknowledgements............................................   54
   References.....................................................   55
   Appendix 1: Notational Tools for Managed Object Definition.....   57
   A1.1 Overview of Notational Tools..............................   57
   A1.2 Conventions Used in Template Definitions..................   58
   A1.3  Managed Object Class Template............................   60
   A1.4  Package Template.........................................   63



OIM Working Group                                               [Page 1]



RFC 1214                       MIB-II-OIM                     April 1991


   A1.5 Parameter Template........................................   67
   A1.6  Name Binding Template....................................   67
   A1.7 Attribute Template........................................   70
   A1.8  Notification Template....................................   73
   Appendix 2: New Objects: Internet SMI Object Type Macros.......   76
   Appendix 3: Supporting Definitions.............................   81
   Security Considerations........................................   82
   Author's Address...............................................   83

1. Introduction

   This memo defines the management information base (MIB) for use with
   the OSI network management protocol in TCP/IP based internets.  It
   formats the Management Information Base (MIB-II) in OSI templates and
   adds variables necessary for use with the OSI management protocol.
   Together with internet memos that define agreements for using the OSI
   management protocol to manage TCP/IP internets (RFC 1189) [3], the
   management information base: MIB-II, and OSI standards defining the
   structure of management information (ISO/IEC DIS 10165) [4,5,6],
   these documents provide an OSI compatible architecture and system for
   managing TCP/IP based internets and in particular the Internet
   community.

   This OSI version of the MIB specification is an incremental
   refinement of MIB-II.  It has been designed according to the
   following policy:  first, maintain compatibility with MIB-II by
   including objects in MIB-II without changes to their registered
   identifiers, syntax, and behaviour;   second, format the MIB-II using
   the OSI structure of information defined templates;  third, add
   attributes necessary for identification using the OSI management
   protocol;  fourth, identify object instances in a manner which is
   compatible with development of a common application programming
   interface for both CMIP and SNMP;  and finally, define notifications
   (events), including those defined by SNMP (RFC 1157) [14], deemed
   necessary for management.

   It is expected that the MIB will grow over time to accommodate the
   changing needs of the Internet.

   As reported in RFC 1109, Report of the Second Ad Hoc Network
   Management Review Group [13], the requirements for SNMP and OSI
   frameworks were more different than anticipated.  Therefore, the
   requirement for compatibility between the SMI/MIB for both frameworks
   was suspended.  This action allowed both frameworks to independently
   define the MIB according to their SMI requirements and views of
   management.   The SNMP response included development of MIB-II.  The
   OSI response is this document which builds on the excellent work done
   in MIB-II, and adds to it attributes necessary to map into the OSI



OIM Working Group                                               [Page 2]



RFC 1214                       MIB-II-OIM                     April 1991


   SMI.

   The OIM network management framework consists of: Open Systems
   Interconnection - Structure of Management Information: Parts 1-4,
   ISO/IEC DIS 10165 [4,5,6], with slight modifications to maintain
   compatibility with RFC 1155 [11];  OSI Internet Management:
   Management Information Base, this memo; and the OSI Common Management
   Information Service (CMIS) [7] and  Common Management Information
   Protocol (CMIP) [8].

2. Additions to MIB-II

   Additions to MIB-II fall into the following categories: the addition
   of the managed object class "top" from which all object classes are
   derived; additions for object instance identification purposes
   according to the OSI SMI;  additions for generation of asynchronous
   events; the addition of name bindings which  define the binding
   between objects in the containment (naming) hierarchy; and the
   addition of proposed changes to RFC 1158 that are expected to be
   accepted by the IETF [16].

2.1 Structure of the OIM Subtree

   The oim subtree structure is defined below.  Note that the "cmot"
   subtree has been relabeled to "oim".

        cmot            OBJECT IDENTIFIER ::= {mib 9}
        oim             OBJECT IDENTIFIER ::= {cmot}
        cmotVersion     OBJECT IDENTIFIER ::= {oim 1}
        cmotACSEInfo    OBJECT IDENTIFIER ::= {oim 2}
        cmotSystemId    OBJECT IDENTIFIER ::= {oim 3}
        misc            OBJECT IDENTIFIER ::= {oim 4}
        objects         OBJECT IDENTIFIER ::= {oim 5}
        attributes      OBJECT IDENTIFIER ::= {oim 6}
        events          OBJECT IDENTIFIER ::= {oim 7}
        nameforms       OBJECT IDENTIFIER ::= {oim 8}
        actions         OBJECT IDENTIFIER ::= {oim 9}

2.2 Supporting ISO Definitions

   The OSI defined managed object class "top" [5], as defined by OSI,
   has been added to the MIB.  This managed object class is the root of
   the inheritance hierarchy.  The class "top" contains attributes that
   are inherited by all objects in the MIB.  Pending the progression of
   ISO/IEC DIS 10165 to an International Standard status, "top" and its
   associated attributes are registered in Appendix 3.





OIM Working Group                                               [Page 3]



RFC 1214                       MIB-II-OIM                     April 1991


2.3 Additions for Object Instance Identification

   The conventions for identifying objects in the OIM MIB-II for use
   with CMIP are defined below.

2.3.1 Distinguished Names

   The distinguished name of an object shall consist of a sequence of
   relative distinguished names, one for each object on the containment
   path from the root to the object.  Each relative distinguished name
   shall contain exactly one attribute, the "naming" attribute for the
   corresponding class, as specified by a NAME BINDING template.  The
   CMIP ObjectInstance shall be encoded using the distinguishedName
   choice.

   Object classes for which there is only a single instance normally
   implemented in a managed system, other than the "system" managed
   object class, shall use an empty string for their naming attribute
   value, i.e., a string of length zero.

   The format of the naming attribute for the "system" managed object
   class and object classes which normally have multiple instances,
   e.g., table entries, are defined in the attribute templates for the
   naming attributes of those classes.  The formats for naming
   attributes of table entries are compatible with instance
   identification conventions used by SNMP, thereby facilitating the
   development of a common application programming interface that may
   interface to either protocol.

   For example, a distinguished name designating a particular routing
   table entry (of class ipRouteEntry) might be

        {
                { sysName  = "troi.mitre.org"}
                { ipId = ""}
                { ipRoutingTableId = "" }
                { ipRouteEntryId = "129.83.2.17" }
        }.

   The naming attributes for each OIM MIB-II managed object class listed
   in section 5 may be determined by reference to the NAME BINDING
   templates listed in section 8.  The naming attribute definitions can
   be found in the alphabetical listing of all attributes in section 6.

   The following attributes have been defined for MIB-II object classes
   for purposes of object instance identification.





OIM Working Group                                               [Page 4]



RFC 1214                       MIB-II-OIM                     April 1991


         Attribute           Identifier              Object

   ifTableId               {attributes 1}         ifTable
   atTableId               {attributes 2}         atTable
   atEntryId               {attributes 3}         atEntry
   ipId                    {attributes 4}         ip
   ipAddrTableId           {attributes 5}         ipAddrTable
   ipRoutingTableId        {attributes 6}         ipRoutingtable
   ipNetToMediaTableId     {attributes 7}         ipNetToMediaTable
   ipNetToMediaEntryId     (attributes 8}         ipNetToMediaEntry
   icmpId                  {attributes 9}         icmp
   tcpId                   {attributes 10}        tcp
   tcpConnTableId          {attributes 11}        tcpConnTable
   tcpConnId               {attributes 12}        tcpConnEntry
   udpId                   {attributes 13}        udp
   udpTable
   udpEntryId              {attributes 15}        udpEntry
   egpId                   {attributes 16}        egp
   egpNeighTableId         {attributes 17}        egpneighTable
   snmpId                  {attributes 18}        snmp
   ipAdEntryId             {attributes 19}        ipAddrEntry
   ipRouteEntryId          {attributes 20}        ipRouteEntry
   ifEntryId               {attributes 21}        ifEntry
   egpNeighEntryId         {attributes 22}        egpNeighEntry
   ifId                    {attributes 23}        interfaces

2.4 Events

   Events have been defined in accordance with the OSI SMI.  These
   events include those defined for SNMP.  The OSI SMI requires that
   events (notifications) are part of a specific managed object class
   definition.  Accordingly the SNMP defined events have been assigned
   to specific objects within the MIB.

           Event                   Identifier              Object

   coldStartEvent                  {events 0}              system
   warmStartEvent                  {events 1}              system
   linkDownEvent                   {events 2}              ifEntry
   linkUpEvent                     {events 3}              ifEntry
   snmpAuthentFailureEvent         {events 4}              snmp
   egpNeighborLossEvent            {events 5}              egpNeighEntry
   entSpecificEvent                {events 6}              system

2.5 Containment (Naming) Tree Definition

   The OSI SMI requires that object classes be bound into the
   containment hierarchy for purposes of naming.  The binding must



OIM Working Group                                               [Page 5]



RFC 1214                       MIB-II-OIM                     April 1991


   specify for the managed object class: a) the object which is superior
   to it in the containment hierarchy; and b) an attribute in the
   managed object class that is used to distinguish instances of the
   object at a given level in the containment hierarchy.  The
   containment tree begins with "root".  Agents in managed systems will
   consider root to be immediately above the "system" object in the
   containment hierarchy.  They may ignore any relative distinguished
   names that precede the relative distinguished name for "system".

   The name bindings for objects in the OIM MIB-II are specified in
   section 8.

2.6  Changes from RFC 1158

   The proposed successor to RFC 1158 [16] contains several minor
   additions that have been incorporated into this document.

      o  The sysLocation attribute of the system managed object
         class is changed to GET-REPLACE.

      o  The ipRouteMetric5 and ipRouteInfo attributes are
         added to the ipRouteEntry managed object class.

      o  The textual descriptor of the snmpEnableAuthTraps is
         changed to snmpEnableAuthenTraps.

      o  The PhysAddress textual convention is introduced to
         represent media addresses.

      o  The definition of sysServices is clarified.

      o  New ifType values (29-32) are defined.  In
         addition, the textual-descriptor for the DS1 and E1
         interface types is corrected.

      o  The definition of ipForwarding is clarified.

      o  The definition of ipRouteType is clarified.

      o  The tcpConnState attribute is now GET-REPLACE, to
         support deletion of the TCB associated with a TCP
         connection.  The definition of this object is
         clarified to explain this usage.

      o  The definition of egpNeighEventTrigger is clarified.

      o  The definition of several of the variables in the new
         snmp group are clarified.  In addition, the



OIM Working Group                                               [Page 6]



RFC 1214                       MIB-II-OIM                     April 1991


         snmpInBadTypes and snmpOutReadOnlys objects are no
         longer present.  (However, the object identifiers associated
         with those objects are reserved to prevent future use.)

      o  The definition of snmpInReadOnlys is clarified.

      o  The ipRoutingDiscards attribute is added to the ip object.

      o  The optional use of an implementation-dependent, small
         positive integer is disallowed when identifying
         instances of the IP address and routing tables.

3. Format of OSI Templates

   The format of OSI templates is defined in ISO/IEC DIS 10165-4 [6],
   Open Systems Interconnection - Structure of Management Information -
   Part 4: Guidelines for Managed Object Definition.

   The template definitions relevant to this document are included in
   Appendix 1.

4. Object Class Definitions

   The Internet SMI objects are recast into OSI template form using the
   following conventions:

      o MIB II groups become OSI object classes,
        except for the "at" group which has no attributes.

      o Tables become OSI object classes.

      o Table entries become OSI object classes.

      o All other object types become OSI attributes and are
        assigned to object classes according to their association
        in MIB II.

   The templates for the OIM MIB-II object classes are listed in
   alphabetical order below.


   atEntry  MANAGED OBJECT CLASS
            DERIVED FROM  top;
            CHARACTERIZED BY
               atEntryPkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                            atEntryId              GET,



OIM Working Group                                               [Page 7]



RFC 1214                       MIB-II-OIM                     April 1991


                               atIfIndex           GET-REPLACE,
                               atPhysAddress       GET-REPLACE,
                               atNetAddress        GET-REPLACE;;;
               REGISTERED AS  { atTable 1};

   atTable  MANAGED OBJECT CLASS
            DERIVED FROM  top;
            CHARACTERIZED BY
               atTablePkg PACKAGE
                           -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                    atTableId                      GET;;;
               REGISTERED AS  { at 1};

   egp MANAGED OBJECT CLASS
            DERIVED FROM  top;
            CHARACTERIZED BY
               egpPkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                               egpId               GET,
                               egpInMsgs           GET,
                               egpInErrors         GET,
                               egpOutMsgs          GET,
                               egpOutErrors        GET,
                            egpAs                  GET;;;
               REGISTERED AS  { mib 8};

   egpNeighEntry MANAGED OBJECT CLASS
            DERIVED FROM  top;
            CHARACTERIZED BY
               egpNeighEntryPkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                            egpNeighEntryId        GET,
                            egpNeighState          GET,
                            egpNeighAddr           GET,
                            egpNeighAs             GET,
                            egpNeighInMsgs         GET,
                            egpNeighInErrs         GET,
                            egpNeighOutMsgs        GET,
                            egpNeighOutErrs        GET,
                            egpNeighInErrMsgs      GET,
                            egpNeighOutErrMsgs     GET,
                            egpNeighStateUps       GET,
                            egpNeighStateDowns     GET,
                            egpNeighIntervalHello  GET,
                            egpNeighIntervalPoll   GET,



OIM Working Group                                               [Page 8]



RFC 1214                       MIB-II-OIM                     April 1991


                            egpNeighMode           GET,
                            egpNeighEventTrigger   GET-REPLACE;
              NOTIFICATIONS
                            egpNeighborLossEvent;;;
            REGISTERED AS  { egpNeighTable 1};

   egpNeighTable MANAGED OBJECT CLASS
            DERIVED FROM   top;
            CHARACTERIZED BY
               egpNeighTablePkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                               egpNeighTableId     GET;;;
               REGISTERED AS  { egp 5};

   icmp MANAGED OBJECT CLASS
            DERIVED FROM  top;
            CHARACTERIZED BY
               icmpPkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                               icmpId GET,
                               icmpInMsgs          GET,
                               icmpInErrors        GET,
                               icmpInDestUnreachs  GET,
                               icmpInTimeExcds     GET,
                               icmpInParmProbs     GET,
                               icmpInSrcQuenchs    GET,
                               icmpInRedirects     GET,
                               icmpInEchos         GET,
                               icmpInEchoReps      GET,
                               icmpInTimestamps    GET,
                               icmpInTimestampReps GET,
                               icmpInAddrMasks     GET,
                               icmpInAddrMaskReps  GET,
                               icmpOutMsgs         GET,
                               icmpOutErrors       GET,
                               icmpOutDestUnreachs GET,
                               icmpOutTimeExcds    GET,
                               icmpOutParmProbs    GET,
                               icmpOutSrcQuenchs   GET,
                               icmpOutRedirects    GET,
                               icmpOutEchos        GET,
                               icmpOutEchoReps     GET,
                               icmpOutTimestamps   GET,
                               icmpOutTimestampReps GET,
                               icmpOutAddrMasks    GET,
                               icmpOutAddrMaskReps GET;;;



OIM Working Group                                               [Page 9]



RFC 1214                       MIB-II-OIM                     April 1991


               REGISTERED AS  { mib 5};

   ifEntry   MANAGED OBJECT CLASS
            DERIVED FROM  top;
            CHARACTERIZED BY
               ifEntryPkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                            ifEntryId              GET,
                               ifIndex             GET,
                               ifDescr             GET,
                               ifType              GET,
                               ifMtu               GET,
                               ifSpeed             GET,
                               ifPhysAddress       GET,
                               ifAdminStatus       GET-REPLACE,
                               ifOperStatus        GET,
                               ifLastChange        GET,
                               ifInOctets          GET,
                               ifInUcastPkts       GET,
                               ifInNUcastPkts      GET,
                               ifInDiscards        GET,
                               ifInErrors          GET,
                               ifInUnknownProtos   GET,
                               ifOutOctets         GET,
                               ifOutUcastPkts      GET,
                               ifOutNUcastPkts     GET,
                               ifOutDiscards       GET,
                               ifOutErrors         GET,
                               ifOutQLen           GET,
                               ifSpecific          GET;
               NOTIFICATIONS
                                           linkUpEvent,
                                           linkDownEvent;;;
               REGISTERED AS  { ifTable 1};

   ifTable MANAGED OBJECT CLASS
            DERIVED FROM  top;
            CHARACTERIZED BY
               ifTablePkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                           ifTableId               GET;;;
                REGISTERED AS  { interface 2};

   interfaces MANAGED OBJECT CLASS
            DERIVED FROM  top;
            CHARACTERIZED BY



OIM Working Group                                              [Page 10]



RFC 1214                       MIB-II-OIM                     April 1991


               interfacesPkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                               ifId                GET,
                               ifNumber            GET;;;
               REGISTERED AS  { mib 2};

   ip MANAGED OBJECT CLASS
            DERIVED FROM  top;
            CHARACTERIZED BY
               ipPkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                               ipId                GET,
                               ipForwarding        GET-REPLACE,
                               ipDefaultTTL        GET-REPLACE,
                               ipInReceives        GET,
                               ipInHdrErrors       GET,
                               ipInAddrErrors      GET,
                               ipForwDatagrams     GET,
                               ipInUnknownProtos   GET,
                               ipInDiscards        GET,
                               ipInDelivers        GET,
                               ipOutRequests       GET,
                               ipOutDiscards       GET,
                               ipOutNoRoutes       GET,
                               ipReasmTimeout      GET,
                               ipReasmReqds        GET,
                               ipReasmOKs          GET,
                               ipReasmFails        GET,
                               ipFragOKs           GET,
                               ipFragFails         GET,
                               ipFragCreates       GET,
                               ipRoutingDiscards   GET;;;
               REGISTERED AS  { mib 4};

   ipAddrEntry MANAGED OBJECT CLASS
            DERIVED FROM  top;
            CHARACTERIZED BY
               ipAddrEntryPkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                               ipAdEntryId         GET,
                               ipAdEntAddr         GET,
                               ipAdEntIfIndex      GET,
                               ipAdEntNetMask      GET,
                               ipAdEntBcastAddr    GET,
                               ipAdEntReasmMaxSize GET;;;



OIM Working Group                                              [Page 11]



RFC 1214                       MIB-II-OIM                     April 1991


           REGISTERED AS  { ipAddrTable 1};

   ipAddrTable MANAGED OBJECT CLASS
            DERIVED FROM  top;
            CHARACTERIZED BY
               ipAddrTablePkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                                   ipAddrTableId           GET;;;
               REGISTERED AS  { ip 20};

   ipNetToMediaEntry       MANAGED OBJECT CLASS
            DERIVED FROM  top;
            CHARACTERIZED BY
               ipNetToMediaEntryPkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                               ipNetToMediaEntryId       GET,
                               ipNetToMediaIfIndex       GET-REPLACE,
                               ipNetToMediaPhysAddress   GET-REPLACE,
                               ipNetToMediaNetAddress    GET-REPLACE,
                               ipNetToMediaType          GET-REPLACE;;;
               REGISTERED AS  { ipNetToMediaTable 1};

   ipNetToMediaTable MANAGED OBJECT CLASS
            DERIVED FROM  top;
            CHARACTERIZED BY
               ipNetToMediaTablePkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                           ipNetToMediaTableId     GET;;;
               REGISTERED AS  { ip 22};

   ipRouteEntry MANAGED OBJECT CLASS
            DERIVED FROM  top;
            CHARACTERIZED BY
               ipRouteEntryPkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                               ipRouteEntryId      GET,
                               ipRouteDest         GET-REPLACE,
                               ipRouteIfIndex      GET-REPLACE,
                               ipRouteMetric1      GET-REPLACE,
                               ipRouteMetric2      GET-REPLACE,
                               ipRouteMetric3      GET-REPLACE,
                               ipRouteMetric4      GET-REPLACE,
                               ipRouteMetric5      GET-REPLACE,
                               ipRouteNextHop      GET-REPLACE,



OIM Working Group                                              [Page 12]



RFC 1214                       MIB-II-OIM                     April 1991


                               ipRouteType         GET-REPLACE,
                               ipRouteProto        GET,
                               ipRouteAge          GET-REPLACE,
                               ipRouteMask         GET-REPLACE,
                               ipRouteInfo         GET-REPLACE;;;
               REGISTERED AS  { ipRoutingTable 1};

   ipRoutingTable MANAGED OBJECT CLASS
            DERIVED FROM  top;
            CHARACTERIZED BY
               ipRoutingTablePkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                           ipRoutingTableId        GET;;;
               REGISTERED AS  { ip 21};

   snmp MANAGED OBJECT CLASS
            DERIVED FROM   top;
            CHARACTERIZED BY
               snmpPkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                           snmpId                  GET,
                           snmpInPkts              GET,
                           snmpInBadVersions       GET,
                           snmpInBadCommunityNames GET,
                           snmpInBadCommunityUses  GET,
                           snmpInASNParseErrs      GET,
                           snmpInTooBigs           GET,
                           snmpInNoSuchNames       GET,
                           snmpInBadValues         GET,
                           snmpInReadOnlys         GET,
                           snmpInGenErrs           GET,
                           snmpInTotalReqVars      GET,
                           snmpInTotalSetVars      GET,
                           snmpInGetRequests       GET,
                           snmpInGetNexts          GET,
                           snmpInSetRequests       GET,
                           snmpInGetResponses      GET,
                           snmpInTraps             GET,
                           snmpOutPkts             GET,
                           snmpOutTooBigs          GET,
                           snmpOutNoSuchNames      GET,
                           snmpOutBadValues        GET,
                           snmpOutGenErrs          GET,
                           snmpOutGetRequests      GET,
                           snmpOutGetNexts         GET,
                           snmpOutSetRequests      GET,



OIM Working Group                                              [Page 13]



RFC 1214                       MIB-II-OIM                     April 1991


                           snmpOutGetResponses     GET,
                           snmpOutTraps            GET,
                           snmpEnableAuthenTraps   GET-REPLACE;
           NOTIFICATIONS
                           snmpAuthentFailureEvent;;;
               REGISTERED AS  {mib 11};

   system MANAGED OBJECT CLASS
           DERIVED FROM top;
           CHARACTERIZED BY
               systemPkg PACKAGE
                           -- SEE MIB II [16] for attribute semantics
                   ATTRIBUTES
                           sysDescr        GET,
                           sysObjectId     GET,
                           sysUpTime       GET,
                           sysContact      GET-REPLACE,
                           sysName         GET-REPLACE,
                           -- MAJOR HEALTH WARNING sysName is the
                           -- naming attribute and should not be
                           -- modified via remote management without
                           -- coordinated local system changes
                           sysLocation     GET-REPLACE,
                           sysServices     GET;
                   NOTIFICATIONS
                           coldStartEvent,
                           warmStartEvent,
                           entSpecificEvent;;;
   REGISTERED AS   {mib 1};

   tcp MANAGED OBJECT CLASS
            DERIVED FROM   top;
            CHARACTERIZED BY
               tcpPkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                               tcpId               GET,
                               tcpRtoAlgorithm     GET,
                               tcpRtoMin           GET,
                               tcpRtoMax           GET,
                               tcpMaxConn          GET,
                               tcpActiveOpens      GET,
                               tcpPassiveOpens     GET,
                               tcpAttemptFails     GET,
                               tcpEstabResets      GET,
                               tcpCurrEstab        GET,
                               tcpInSegs           GET,
                               tcpOutSegs          GET,



OIM Working Group                                              [Page 14]



RFC 1214                       MIB-II-OIM                     April 1991


                               tcpRetransSegs      GET,
                               tcpInErrs           GET,
                               tcpOutRsts          GET;;;
               REGISTERED AS { mib 6};

   tcpConnEntry MANAGED OBJECT CLASS
            DERIVED FROM  top;
            CHARACTERIZED BY
               tcpConnEntryPkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                               tcpConnId           GET,
                               tcpConnState        GET-REPLACE,
                               tcpConnLocalAddress GET,
                               tcpConnLocalPort    GET,
                               tcpConnRemAddress   GET,
                               tcpConnRemPort      GET;;;
               REGISTERED AS { tcpConnTable 1 };


   tcpConnTable MANAGED OBJECT CLASS
            DERIVED FROM   top;
            CHARACTERIZED BY
               tcpConnTablePkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                               tcpConnTableId      GET;;;
               REGISTERED AS { tcp 13 };

   udp MANAGED OBJECT CLASS
            DERIVED FROM   top;
            CHARACTERIZED BY
               udpPkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES
                               udpId               GET,
                               udpInDatagrams      GET,
                               udpNoPorts          GET,
                               udpInErrors         GET,
                               udpOutDatagrams     GET;;;
               REGISTERED AS  { mib 7};

    udpEntry MANAGED OBJECT CLASS
            DERIVED FROM  top;
            CHARACTERIZED BY
               udpEntryPkg PACKAGE
                   -- see MIB II [16] for attribute semantics
               ATTRIBUTES



OIM Working Group                                              [Page 15]



RFC 1214                       MIB-II-OIM                     April 1991


                               udpEntryId          GET,
                               udpLocalAddress     GET,
                               udpLocalPort        GET;;;
               REGISTERED AS { udpTable 1 };


   udpTable MANAGED OBJECT CLASS
            DERIVED FROM   top;
            CHARACTERIZED BY
               udpTablePkg PACKAGE
                   -- see MIB II [16] for semantics
               ATTRIBUTES
                               udpTableId          GET;;;
               REGISTERED AS { udp 5 };

5. Attribute Definitions

   Attribute templates for the attributes referenced in the managed
   object class templates of section 5 are listed here in alphabetical
   order.


atEntryId ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
              MATCHES FOR      Equality;
        -- identifies the atEntry instance
        -- <index>".1." <address>, where <index is the decimal
        -- representation of atIfIndex and <address> is atNetAddress
        -- represented in "dot notation".  The "1" subidentifier
        -- indicates that the address is an IP address.
           REGISTERED AS {attributes 3};

atIfIndex ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.Integer;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {atEntry 1};

atNetAddress ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.NetworkAddress;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {atEntry 3};

atPhysAddress ATTRIBUTE
             WITH ATTRIBUTE SYNTAX  OIM-Module.PhysAddress;
              MATCHES FOR      Equality;



OIM Working Group                                              [Page 16]



RFC 1214                       MIB-II-OIM                     April 1991


                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {atEntry 2};

atTableId  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- This attribute identifies the instance of
                -- the address table  which is being used.
                -- An empty string is used for a single
                -- instance.
           REGISTERED AS {attributes 2};

egpAs   ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.Integer;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egp 6};

egpId      ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- EGP entity naming attribute.
                -- An empty string is used for a single instance.
           REGISTERED AS {attributes 16};

egpInErrors ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egp 2};

egpInMsgs  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egp 1};

egpNeighAddr    ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.IpAddress;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egpNeighEntry 2};

egpNeighAs      ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.Integer;
              MATCHES FOR      Equality, Ordering;



OIM Working Group                                              [Page 17]



RFC 1214                       MIB-II-OIM                     April 1991


                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egpNeighEntry 3};

egpNeighEntryId  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                 OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- identifies the egp neighbor table entry.
                -- egpNeighAddr encoded in "dot notation".
                   REGISTERED AS {attributes 22};

egpNeighEventTrigger    ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                 OIM-Module.EgpNeighEventTrigger;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egpNeighEntry 15};

egpNeighInErrMsgs       ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egpNeighEntry 8};

egpNeighInErrs  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egpNeighEntry  5};

egpNeighInMsgs  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egpNeighEntry 4};

egpNeighIntervalHello   ATTRIBUTE
         WITH ATTRIBUTE SYNTAX
                  OIM-Module.Integer;
         MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
       REGISTERED AS {egpNeighEntry 12};

egpNeighIntervalPoll    ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                 OIM-Module.Integer;
              MATCHES FOR      Equality, Ordering;



OIM Working Group                                              [Page 18]



RFC 1214                       MIB-II-OIM                     April 1991


                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egpNeighEntry 13};

egpNeighMode    ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.EgpNeighMode;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egpNeighEntry 14};

egpNeighOutErrMsgs      ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egpNeighEntry 9};

egpNeighOutErrs ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egpNeighEntry 7};

egpNeighOutMsgs ATTRIBUTE
           WITH ATTRIBUTE SYNTAX RFC1065-SMI.Counter;
           MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
REGISTERED AS {egpNeighEntry 6};

egpNeighState ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.EgpNeighState;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egpNeighEntry 1};

egpNeighStateDowns      ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                 RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egpNeighEntry 11};

egpNeighStateUps        ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egpNeighEntry 10};



OIM Working Group                                              [Page 19]



RFC 1214                       MIB-II-OIM                     April 1991


egpNeighTableId ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                 OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- This attribute uniquely identifies the
                -- egp neighbor table
                -- An empty string is used for a single instance.
           REGISTERED AS {attributes 17};

egpOutErrors ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egp 4};

egpOutMsgs  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {egp 3};

icmpId     ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- This attribute uniquely identifies the
                -- ICMP object instance
                -- An empty string is used for a single instance.
           REGISTERED AS {attributes 9};

icmpInAddrMaskReps ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 13};

icmpInAddrMasks ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 12};

icmpInDestUnreachs ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;



OIM Working Group                                              [Page 20]



RFC 1214                       MIB-II-OIM                     April 1991


                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 3};

icmpInEchoReps ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 9};

icmpInEchos  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 8};

icmpInErrors ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 2};

icmpInMsgs ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 1};

icmpInParmProbs ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 5};

icmpInRedirects ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 7};

icmpInSrcQuenchs ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                 RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 6};



OIM Working Group                                              [Page 21]



RFC 1214                       MIB-II-OIM                     April 1991


icmpInTimeExcds ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 4};

icmpInTimestampReps ATTRIBUTE
       WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
       MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
    REGISTERED AS {icmp 11};

icmpInTimestamps ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 10};

icmpOutAddrMaskReps ATTRIBUTE
          WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
          MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
       REGISTERED AS {icmp 26};

icmpOutAddrMasks ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 25};

icmpOutDestUnreachs ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                 RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 16};

icmpOutEchoReps  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 22};



OIM Working Group                                              [Page 22]



RFC 1214                       MIB-II-OIM                     April 1991


icmpOutEchos ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 21};

icmpOutErrors ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 15};

icmpOutMsgs ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 14};

icmpOutParmProbs ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 18};

icmpOutRedirects ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 20};

icmpOutSrcQuenchs ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                 RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 19};

icmpOutTimeExcds ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 17};






OIM Working Group                                              [Page 23]



RFC 1214                       MIB-II-OIM                     April 1991


icmpOutTimestampReps ATTRIBUTE
      WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
      MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
   REGISTERED AS {icmp 24};

icmpOutTimestamps ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                 RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {icmp 23};

ifAdminStatus ATTRIBUTE
             WITH ATTRIBUTE SYNTAX  OIM-Module.IfAdminStatus;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ifEntry 7};

ifDescr ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ifEntry 2};

ifEntryId  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                 OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- The decimal representation of ifIndex.
           REGISTERED AS {attributes 21};

ifId         ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- An empty string is used for a single instance.
           REGISTERED AS {attributes 23};

ifIndex    ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.Integer;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ifEntry 1};

ifInDiscards ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;



OIM Working Group                                              [Page 24]



RFC 1214                       MIB-II-OIM                     April 1991


              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ifEntry 13};

ifInErrors ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ifEntry 14};

ifInNUcastPkts ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ifEntry 12};

ifInOctets ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ifEntry 10};

ifInUcastPkts ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ifEntry 11};

ifInUnknownProtos ATTRIBUTE
     WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
     MATCHES FOR      Equality, Ordering;
        -- SEE MIB II [16] for attribute semantics
  REGISTERED AS {ifEntry 15};

ifLastChange ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.TimeTicks;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ifEntry 9};

ifMtu ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.Integer;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ifEntry 4};

ifNumber  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.Integer;



OIM Working Group                                              [Page 25]



RFC 1214                       MIB-II-OIM                     April 1991


              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {interfaces 1};

ifOperStatus ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.IfOperStatus;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ifEntry 8};

ifOutDiscards ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ifEntry 19};

ifOutErrors ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;

              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ifEntry 20};

ifOutNUcastPkts ATTRIBUTE
        WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
        MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
     REGISTERED AS {ifEntry 18};

ifOutOctets ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;

              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ifEntry 16};

ifOutQLen ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Gauge;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ifEntry 21};

ifOutUcastPkts ATTRIBUTE
         WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
         MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
      REGISTERED AS {ifEntry 17};




OIM Working Group                                              [Page 26]



RFC 1214                       MIB-II-OIM                     April 1991


ifPhysAddress ATTRIBUTE
         WITH ATTRIBUTE SYNTAX  OIM-Module.PhysAddress;
         MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
      REGISTERED AS {ifEntry 6};

ifSpecific ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.ObjectId;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ifEntry 22};

ifSpeed ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Gauge;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ifEntry 5};

ifTableId  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- an empty string
           REGISTERED AS {attributes 1};

ifType ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.IfType;
             MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
          REGISTERED AS {ifEntry 3};

ipAddrTableId ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- This attribute provides a unique id
                -- which identifies the address table.
                -- An empty string is used for a single instance.
           REGISTERED AS {attributes 5};

ipAdEntAddr ATTRIBUTE
              WITH ATTRIBUTE SYNTAX   RFC1065-SMI.IpAddress;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ipAddrEntry 1};

ipAdEntBcastAddr ATTRIBUTE
          WITH ATTRIBUTE SYNTAX  OIM-Module.Integer;



OIM Working Group                                              [Page 27]



RFC 1214                       MIB-II-OIM                     April 1991


           MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
         REGISTERED AS {ipAddrEntry 4};

ipAdEntIfIndex ATTRIBUTE
              WITH ATTRIBUTE SYNTAX   OIM-Module.Integer;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ipAddrEntry 2};

ipAdEntNetMask ATTRIBUTE
           WITH ATTRIBUTE SYNTAX   RFC1065-SMI.IpAddress;
           MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
         REGISTERED AS {ipAddrEntry 3};

ipAdEntReasmMaxSize ATTRIBUTE
   WITH ATTRIBUTE SYNTAX  OIM-Module.Integer64k;
    MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
  REGISTERED AS {ipAddrEntry 5};

ipAdEntryId  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- This attribute uniquely identifies the ip address
                -- table entry.  The format is:
                -- <addr> , where <addr> is ipAdEntAddr
                -- represented in "dot notation".
           REGISTERED AS {attributes 19};

ipDefaultTTL ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.Integer;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ip 2};

ipForwarding ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.IpForwarding;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ip 1};

ipForwDatagrams ATTRIBUTE
       WITH ATTRIBUTE SYNTAX   RFC1065-SMI.Counter;
       MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics



OIM Working Group                                              [Page 28]



RFC 1214                       MIB-II-OIM                     April 1991


     REGISTERED AS {ip 6};

ipFragCreates ATTRIBUTE
              WITH ATTRIBUTE SYNTAX   RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ip 19};

ipFragFails ATTRIBUTE
              WITH ATTRIBUTE SYNTAX   RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ip 18};

ipFragOKs ATTRIBUTE
              WITH ATTRIBUTE SYNTAX   RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ip 17};

ipId ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- identifies the Ip entity.
                -- An empty string is used for a single instance
           REGISTERED AS {attributes 4};

ipInAddrErrors ATTRIBUTE
             WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ip 5};

ipInDelivers ATTRIBUTE
              WITH ATTRIBUTE SYNTAX   RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ip 9};

ipInDiscards ATTRIBUTE
              WITH ATTRIBUTE SYNTAX   RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ip 8};

ipInHdrErrors ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;



OIM Working Group                                              [Page 29]



RFC 1214                       MIB-II-OIM                     April 1991


              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ip 4};

ipInReceives ATTRIBUTE
              WITH ATTRIBUTE SYNTAX RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ip 3};

ipInUnknownProtos ATTRIBUTE
     WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
     MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
   REGISTERED AS {ip 7};

ipNetToMediaEntryId ATTRIBUTE
       WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
        MATCHES FOR      Equality;
                -- identifies an instance of IpNetToMediaEntry
                -- <interface> "." <address>, where <interface> is the
                -- decimal representation of ipNetToMediaIfIndex and
                -- <address> is ipNetToMediaNetAddress in
                -- "dot notation".
    REGISTERED AS {attributes 8};

ipNetToMediaIfIndex ATTRIBUTE
       WITH ATTRIBUTE SYNTAX    OIM-Module.Integer;
        MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
    REGISTERED AS {ipNetToMediaEntry 1};

ipNetToMediaNetAddress ATTRIBUTE
     WITH ATTRIBUTE SYNTAX
        RFC1065-SMI.IpAddress;
     MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
    REGISTERED AS {ipNetToMediaEntry 3};

ipNetToMediaPhysAddress ATTRIBUTE
     WITH ATTRIBUTE SYNTAX
        OIM-Module.PhysAddress;
     MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
    REGISTERED AS {ipNetToMediaEntry 2};





OIM Working Group                                              [Page 30]



RFC 1214                       MIB-II-OIM                     April 1991


ipNetToMediaTableId  ATTRIBUTE
     WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
      MATCHES FOR      Equality;
                -- This is the distinguishing attribute for the
                -- Ip Net to Media Table.
                -- An empty string is used for a single instance.
   REGISTERED AS {attributes 7};

ipNetToMediaType ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                          OIM-Module.IpNetToMediaType;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ipNetToMediaEntry 4};

ipOutDiscards ATTRIBUTE
              WITH ATTRIBUTE SYNTAX   RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ip 11};

ipOutNoRoutes ATTRIBUTE
              WITH ATTRIBUTE SYNTAX   RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ip 12};

ipOutRequests ATTRIBUTE
              WITH ATTRIBUTE SYNTAX   RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ip 10};

ipReasmFails ATTRIBUTE
              WITH ATTRIBUTE SYNTAX   RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ip 16};

ipReasmOKs ATTRIBUTE
              WITH ATTRIBUTE SYNTAX   RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ip 15};

ipReasmReqds ATTRIBUTE
              WITH ATTRIBUTE SYNTAX   RFC1065-SMI.Counter;



OIM Working Group                                              [Page 31]



RFC 1214                       MIB-II-OIM                     April 1991


              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ip 14};

ipReasmTimeout ATTRIBUTE
          WITH ATTRIBUTE SYNTAX   OIM-Module.Integer;
           MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
         REGISTERED AS {ip 13};

 ipRouteAge ATTRIBUTE
              WITH ATTRIBUTE SYNTAX   OIM-Module.Integer;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ipRouteEntry 10};

ipRouteDest ATTRIBUTE
              WITH ATTRIBUTE SYNTAX   RFC1065-SMI.IpAddress;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ipRouteEntry 1};

ipRouteEntryId  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- This attribute identifies the ip route table entry.
                -- The format is <dest>, where <dest> is
                -- ipRouteDest represented in "dot notation.
REGISTERED AS {attributes 20};

ipRouteIfIndex ATTRIBUTE
              WITH ATTRIBUTE SYNTAX   OIM-Module.Integer;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ipRouteEntry 2};

ipRouteInfo ATTRIBUTE
             WITH ATTRIBUTE SYNTAX   OIM-Module.ObjectId;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ipRouteEntry 13};

ipRouteMask ATTRIBUTE
              WITH ATTRIBUTE SYNTAX   RFC1065-SMI.IpAddress;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ipRouteEntry 11};



OIM Working Group                                              [Page 32]



RFC 1214                       MIB-II-OIM                     April 1991


ipRouteMetric1 ATTRIBUTE
            WITH ATTRIBUTE SYNTAX   OIM-Module.Integer;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ipRouteEntry 3};

ipRouteMetric2 ATTRIBUTE
             WITH ATTRIBUTE SYNTAX   OIM-Module.Integer;
             MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ipRouteEntry 4};

ipRouteMetric3 ATTRIBUTE
             WITH ATTRIBUTE SYNTAX   OIM-Module.Integer;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ipRouteEntry 5};

ipRouteMetric4 ATTRIBUTE
             WITH ATTRIBUTE SYNTAX   OIM-Module.Integer;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ipRouteEntry 6};

ipRouteMetric5 ATTRIBUTE
             WITH ATTRIBUTE SYNTAX   OIM-Module.Integer;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ipRouteEntry 12};

ipRouteNextHop ATTRIBUTE
            WITH ATTRIBUTE SYNTAX   RFC1065-SMI.IpAddress;
             MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ipRouteEntry 7};

ipRouteProto ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.IpRouteProto;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ipRouteEntry 9};

ipRouteType ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.IpRouteType;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ipRouteEntry 8};




OIM Working Group                                              [Page 33]



RFC 1214                       MIB-II-OIM                     April 1991


ipRoutingDiscards ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {ip 23};

ipRoutingTableId  ATTRIBUTE
          WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
          MATCHES FOR      Equality;
                -- unique id which identifies the
                -- Ip Routing Table instance.
                -- An empty string is used for a single instance.
        REGISTERED AS {attributes 6};

snmpEnableAuthenTraps   ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                         OIM-Module.SnmpEnableAuthenTraps;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 30};

snmpId  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                 OIM-Module.PrintString;
              MATCHES FOR      Equality;
                        -- naming attribute for snmp
                        -- An empty string is used for a single instance.
           REGISTERED AS {attributes 18};

snmpInASNParseErrs      ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 6};

snmpInBadCommunityNames ATTRIBUTE
    WITH ATTRIBUTE SYNTAX
          RFC1065-SMI.Counter;
    MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
  REGISTERED AS {snmp 4};

snmpInBadCommunityUses  ATTRIBUTE
    WITH ATTRIBUTE SYNTAX
                 RFC1065-SMI.Counter;
    MATCHES FOR      Equality, Ordering;



OIM Working Group                                              [Page 34]



RFC 1214                       MIB-II-OIM                     April 1991


                -- SEE MIB II [16] for attribute semantics
  REGISTERED AS {snmp 5};

snmpInBadValues ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                          RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 10};

snmpInBadVersions       ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 3};

snmpInGenErrs   ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 12};

snmpInGetNexts  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 16};

snmpInGetRequests       ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 15};

snmpInGetResponses      ATTRIBUTE
       WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
       MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
    REGISTERED AS {snmp 18};

snmpInNoSuchNames       ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;



OIM Working Group                                              [Page 35]



RFC 1214                       MIB-II-OIM                     April 1991


                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 9};

snmpInPkts      ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 1};

snmpInReadOnlys ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                         RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 11};

snmpInSetRequests       ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 17};

snmpInTooBigs   ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 8};

snmpInTotalReqVars      ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 13};

snmpInTotalSetVars      ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 14};

snmpInTraps     ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 19};



OIM Working Group                                              [Page 36]



RFC 1214                       MIB-II-OIM                     April 1991


snmpOutBadValues        ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                          RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 22};

snmpOutGenErrs  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                          RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 24};

snmpOutGetNexts ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 26};

snmpOutGetRequests      ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 25};

snmpOutGetResponses     ATTRIBUTE
       WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
       MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
    REGISTERED AS {snmp 28};

snmpOutNoSuchNames      ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 21};

snmpOutPkts     ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 2};




OIM Working Group                                              [Page 37]



RFC 1214                       MIB-II-OIM                     April 1991


snmpOutSetRequests      ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 27};

snmpOutTooBigs  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                         RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 20};

snmpOutTraps    ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {snmp 29};

sysContact ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
             MATCHES FOR                 Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {system 4};

sysDescr ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
             MATCHES FOR                 Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {system 1};

sysLocation     ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
             MATCHES FOR                 Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {system 6};

sysName         ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
             MATCHES FOR                 Equality;
                -- SEE MIB II [16] for attribute semantics
                -- The nodes domain name.
           REGISTERED AS {system 5};



OIM Working Group                                              [Page 38]



RFC 1214                       MIB-II-OIM                     April 1991


sysObjectId     ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.ObjectId;
             MATCHES FOR                 Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {system 2};

sysServices     ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.Integer128;
             MATCHES FOR                 Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {system 7};

sysUpTime       ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.TimeTicks;
             MATCHES FOR                 Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {system 3};

tcpActiveOpens ATTRIBUTE
              WITH ATTRIBUTE SYNTAX RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {tcp 5};

tcpAttemptFails  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {tcp 7};

tcpConnId ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- identifies an instance of tcpConnEntry
                -- <laddr> "." <lport> "." <raddr> "." <rport>, where
                -- <laddr> is the "dot notation" representation of
                -- tcpConnLocalAddress,
                -- <lport> is the decimal representation of
                -- tcpConnLocalPort,
                -- <raddr> is the "dot notation" representation of
                -- tcpConnRemAddress, and
                --<rport> is the decimal representation of
                -- tcpConnRemPort.
           REGISTERED AS {attributes 12};





OIM Working Group                                              [Page 39]



RFC 1214                       MIB-II-OIM                     April 1991


tcpConnLocalAddress ATTRIBUTE
     WITH ATTRIBUTE SYNTAX RFC1065-SMI.IpAddress;
     MATCHES FOR      Equality;
        -- SEE MIB II [16] for attribute semantics
REGISTERED AS {tcpConnEntry 2};

tcpConnLocalPort ATTRIBUTE
    WITH ATTRIBUTE SYNTAX       OIM-Module.Integer64k;
    MATCHES FOR      Equality, Ordering;
        -- SEE MIB II [16] for attribute semantics
REGISTERED AS {tcpConnEntry 3};

tcpConnRemAddress ATTRIBUTE
    WITH ATTRIBUTE SYNTAX  RFC1065-SMI.IpAddress;
    MATCHES FOR      Equality;
        -- SEE MIB II [16] for attribute semantics
REGISTERED AS {tcpConnEntry 4};

tcpConnRemPort  ATTRIBUTE
            WITH ATTRIBUTE SYNTAX       OIM-Module.Integer64k;
            MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
REGISTERED AS {tcpConnEntry 5};

tcpConnState ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.TcpConnState;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {tcpConnEntry 1};

tcpConnTableId ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- This attribute defines a unique index of
                -- tcpConnEntry in the TCP Connection Table
                -- An empty string is used for a single instance.
           REGISTERED AS {attributes 11};

tcpCurrEstab ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Gauge;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {tcp 9};

tcpEstabResets ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;



OIM Working Group                                              [Page 40]



RFC 1214                       MIB-II-OIM                     April 1991


                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {tcp 8};

tcpId      ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                 OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- This attribute uniquely identified a tcp
                -- object instance
                -- An empty string is used for a single instance.
           REGISTERED AS {attributes 10};

tcpInErrs ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                 RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {tcp 14};

tcpInSegs ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {tcp 10};

tcpMaxConn ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.Integer;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {tcp 4};

tcpOutRsts ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                 RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {tcp 15};

tcpOutSegs ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {tcp 11};

tcpPassiveOpens  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;



OIM Working Group                                              [Page 41]



RFC 1214                       MIB-II-OIM                     April 1991


                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {tcp 6};

tcpRetransSegs ATTRIBUTE
              WITH ATTRIBUTE SYNTAX RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {tcp 12};

tcpRtoAlgorithm ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  OIM-Module.TcpRtoAlgorithm;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {tcp 1};

tcpRtoMax  ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.Integer;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
        REGISTERED AS {tcp 3};

tcpRtoMin ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  OIM-Module.Integer;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {tcp 2};

udpEntryId ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- This attribute defines an entry
                -- for the UDP Listener Table
                -- <port> "." <address>, where <port> is the decimal
                -- representation of udpLocalPort and <address> is
                -- udpLocalAddress represented in "dot notation".
           REGISTERED AS {attributes 15};

udpId      ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- This attribute provides a unique id to
                -- identify the UDP entity.
                -- An empty string is used for a single instance.
           REGISTERED AS {attributes 13};




OIM Working Group                                              [Page 42]



RFC 1214                       MIB-II-OIM                     April 1991


udpInDatagrams ATTRIBUTE
              WITH ATTRIBUTE SYNTAX RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {udp 1};

udpInErrors ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {udp 3};

udpLocalAddress ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  RFC1065-SMI.IpAddress;
              MATCHES FOR      Equality;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {udpEntry 1};

udpLocalPort ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                  OIM-Module.Integer64k;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {udpEntry 2};

udpNoPorts ATTRIBUTE
              WITH ATTRIBUTE SYNTAX  RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {udp 2};

udpOutDatagrams ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                 RFC1065-SMI.Counter;
              MATCHES FOR      Equality, Ordering;
                -- SEE MIB II [16] for attribute semantics
           REGISTERED AS {udp 4};

udpTableId ATTRIBUTE
              WITH ATTRIBUTE SYNTAX
                OIM-Module.PrintString;
              MATCHES FOR      Equality;
                -- This attribute defines a unique id
                -- for the UDP Listener Table
                -- An empty string is used for a single instance.
           REGISTERED AS {attributes 14};




OIM Working Group                                              [Page 43]



RFC 1214                       MIB-II-OIM                     April 1991


6. Notifications

   Notification templates for the notifications referenced in the
   managed object class templates of section 5 are listed here in
   alphabetical order.


   coldStartEvent NOTIFICATION
                   -- clause 4.1.6.1 of RFC1157
                   -- emitted by system
           MODE    NON-CONFIRMED;
           WITH INFORMATION SYNTAX OIM-Module.SnmpTrapInfo
   REGISTERED AS {events 0};

   egpNeighborLossEvent NOTIFICATION
                   -- clause 4.1.6.6 of RFC1157
                                   -- with generic-trap = 5
                                   -- The first VarBindList element
                                   -- contains the name and value of the
                                   -- egpNeighAddr of the affected
                                   -- neighbor.
                                   -- emitted by egpNeighEntry
           MODE    NON-CONFIRMED;
           WITH INFORMATION SYNTAX OIM-Module.SnmpTrapInfo;
   REGISTERED AS {events 5};

   linkDownEvent NOTIFICATION
                   -- clause 4.1.6.3 of RFC1157
                   -- emitted by ifEntry
                   -- with generic-trap = 2
           MODE    NON-CONFIRMED;
           WITH INFORMATION SYNTAX OIM-Module.SnmpTrapInfo;
   REGISTERED AS {events 2};

   linkUpEvent NOTIFICATION
                   -- clause 4.1.6.4 of RFC1157
                   -- emitted by ifEntry
                   -- with generic-trap = 3
           MODE    NON-CONFIRMED;
           WITH INFORMATION SYNTAX OIM-Module.SnmpTrapInfo;
   REGISTERED AS {events 3};

   snmpAuthentFailureEvent NOTIFICATION
                   -- clause 4.1.6.5 of RFC1157
                   -- emitted by snmp
           MODE    NON-CONFIRMED;
           WITH INFORMATION SYNTAX OIM-Module.SnmpTrapInfo;
   REGISTERED AS {events 4};



OIM Working Group                                              [Page 44]



RFC 1214                       MIB-II-OIM                     April 1991


   entSpecificEvent NOTIFICATION
                   -- clause 4.1.6.7 of RFC1157
                   -- emitted by system
           MODE    NON-CONFIRMED;
           WITH INFORMATION SYNTAX OIM-Module.SnmpTrapInfo;
   REGISTERED AS {events 6};

   warmStartEvent NOTIFICATION
                   -- clause 4.1.6.2 of RFC1157
                   -- emitted by system
           MODE    NON-CONFIRMED;
           WITH INFORMATION SYNTAX OIM-Module.SnmpTrapInfo;
   REGISTERED AS {events 1};

7. The Containment Hierarchy

   Name Binding templates that define the containment hierarchy for the
   OIM MIB-II are listed here in alphabetical order.   The containment
   hierarchy within a managed system begins at the "system" managed
   object.


   atEntry-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     atEntry;
              NAMED BY SUPERIOR OBJECT CLASS   atTable;
              WITH ATTRIBUTE        atEntryId;
             CREATE;
             DELETE        only-if-no-contained-objects;
              REGISTERED AS { nameForms 5};

   atTable-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     atTable;
              NAMED BY SUPERIOR OBJECT CLASS   system;
              WITH ATTRIBUTE        atTableId;
              REGISTERED AS { nameForms 4};

   egp-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     egp;
              NAMED BY SUPERIOR OBJECT CLASS      system;
              WITH ATTRIBUTE        egpId;
              REGISTERED AS { nameForms 20};

   egpNeighEntry-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     egpNeighEntry;
              NAMED BY SUPERIOR OBJECT CLASS      egpNeighTable;
              WITH ATTRIBUTE        egpNeighEntryId;
             CREATE;
             DELETE        only-if-no-contained-objects;



OIM Working Group                                              [Page 45]



RFC 1214                       MIB-II-OIM                     April 1991


              REGISTERED AS { nameForms 22};

   egpNeighTable-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     egpNeighTable;
              NAMED BY SUPERIOR OBJECT CLASS      egp;
              WITH ATTRIBUTE        egpNeighTableId;
              REGISTERED AS { nameForms 21};

   icmp-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     icmp;
              NAMED BY SUPERIOR OBJECT CLASS      system;
              WITH ATTRIBUTE        icmpId;
              REGISTERED AS { nameForms 13};

   interfaces-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     interfaces;
              NAMED BY SUPERIOR OBJECT CLASS   system;
              WITH ATTRIBUTE        ifId;
              REGISTERED AS { nameForms 24};


   ifEntry-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     ifEntry;
              NAMED BY SUPERIOR OBJECT CLASS   ifTable;
              WITH ATTRIBUTE        ifEntryId;
             CREATE;
             DELETE        only-if-no-contained-objects;
              REGISTERED AS { nameForms 3};

   ifTable-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     ifTable;
              NAMED BY SUPERIOR OBJECT CLASS  interfaces;
              WITH ATTRIBUTE   ifTableId;
              REGISTERED AS { nameForms 2};

   ip-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     ip;
              NAMED BY SUPERIOR OBJECT CLASS   system;
              WITH ATTRIBUTE        ipId;
              REGISTERED AS        { nameForms 6};

   ipAddrEntry-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     ipAddrEntry;
              NAMED BY SUPERIOR OBJECT CLASS  ipAddrTable;
              WITH ATTRIBUTE        ipAdEntryId;
             CREATE;
             DELETE        only-if-no-contained-objects;
              REGISTERED AS { nameForms 8};



OIM Working Group                                              [Page 46]



RFC 1214                       MIB-II-OIM                     April 1991


   ipAddrTable-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     ipAddrTable;
              NAMED BY SUPERIOR OBJECT CLASS   ip;
              WITH ATTRIBUTE        ipAddrTableId;
              REGISTERED AS { nameForms 7};

   ipNetToMediaEntry-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     ipNetToMediaEntry;
              NAMED BY SUPERIOR OBJECT CLASS  ipNetToMediaTable;
              WITH ATTRIBUTE        ipNetToMediaEntryId;
             CREATE;
             DELETE        only-if-no-contained-objects;
              REGISTERED AS { nameForms 12};

   ipNetToMediaTable-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     ipNetToMediaTable;
              NAMED BY SUPERIOR OBJECT CLASS  ip;
              WITH ATTRIBUTE        ipNetToMediaTableId;
              REGISTERED AS { nameForms 11};


   ipRouteEntry-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     ipRouteEntry;
              NAMED BY SUPERIOR OBJECT CLASS  ipRoutingTable;
              WITH ATTRIBUTE        ipRouteEntryId;
             CREATE;
             DELETE        only-if-no-contained-objects;
              REGISTERED AS { nameForms 10};

   ipRoutingTable-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     ipRoutingTable;
              NAMED BY SUPERIOR OBJECT CLASS   ip;
              WITH ATTRIBUTE        ipRoutingTableId;
              REGISTERED AS { nameForms 9};

   snmp-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     snmp;
              NAMED BY SUPERIOR OBJECT CLASS      system;
              WITH ATTRIBUTE        snmpId;
              REGISTERED AS { nameForms 23};

   system-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     system;
              NAMED BY SUPERIOR OBJECT CLASS  root;
              WITH ATTRIBUTE   sysName;
              REGISTERED AS { nameForms 1 };





OIM Working Group                                              [Page 47]



RFC 1214                       MIB-II-OIM                     April 1991


   tcp-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     tcp;
              NAMED BY SUPERIOR OBJECT CLASS      system;
              WITH ATTRIBUTE        tcpid;
              REGISTERED AS { nameForms 14};

   tcpConnEntry-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     tcpConnEntry;
              NAMED BY SUPERIOR OBJECT CLASS      tcpConnTable;
              WITH ATTRIBUTE       tcpConnId;
              REGISTERED AS { nameForms 16};

   tcpConnTable-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     tcpConnTable;
              NAMED BY SUPERIOR OBJECT CLASS      tcp;
              WITH ATTRIBUTE        tcpConnTableId;
              REGISTERED AS { nameForms 15};

   udp-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     udp;
              NAMED BY SUPERIOR OBJECT CLASS      system;
              WITH ATTRIBUTE        udpId;
              REGISTERED AS { nameForms 17};

   udpEntry-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     udpEntry;
              NAMED BY SUPERIOR OBJECT CLASS      udpTable;
              WITH ATTRIBUTE        udpEntryId;
              REGISTERED AS { nameForms 19};

   udpTable-nf  NAME BINDING
              SUBORDINATE OBJECT CLASS     udpTable;
              NAMED BY SUPERIOR OBJECT CLASS      udp;
              WITH ATTRIBUTE        udpTableId;
              REGISTERED AS { nameForms 18};
















OIM Working Group                                              [Page 48]



RFC 1214                       MIB-II-OIM                     April 1991


8. ASN.1 Definitions

   The ASN.1 syntax referenced by the attribute templates in section 6
   are either defined in RFC1065-SMI, the Attribute-ASN1Module of
   ISO/IEC DIS 10165-2, or in the OIM-Module defined in this section.
   This module includes some syntax definitions taken from the RFC1158
   since they were not included in that document inside an ASN.1 module
   and hence could not be externally referenced.

OIM-Module      {iso org(3) dod(6) internet(1) mgmt(2) mib(1)
                         oim(9) misc(4) 1}
DEFINITIONS ::=
BEGIN
-- EXPORTS      Everything

IMPORTS ObjectClass, ObjectInstance
                FROM CMIP-1{joint-iso-ccitt ms(9) cmip(1)
                                 modules(0) protocol(3)}
                ObjectName, ObjectSyntax
                FROM RFC1065-SMI;

mib                     OBJECT IDENTIFIER ::= {iso org(3) dod(6)
                                        internet(1) mgmt(2) 1}
at                      OBJECT IDENTIFIER ::= {mib 3}
oim                     OBJECT IDENTIFIER ::= {mib 9}
cmotVersion     OBJECT IDENTIFIER ::= {oim 1}
cmotACSEInfo    OBJECT IDENTIFIER ::= {oim 2}
cmotSystemId    OBJECT IDENTIFIER ::= {oim 3}
misc                    OBJECT IDENTIFIER ::= {oim 4}
objects         OBJECT IDENTIFIER ::= {oim 5}
attributes              OBJECT IDENTIFIER ::= {oim 6}
events          OBJECT IDENTIFIER ::= {oim 7}
nameforms       OBJECT IDENTIFIER ::= {oim 8}
actions         OBJECT IDENTIFIER ::= {oim 9}

--  Generic and MIB specific syntax

EgpNeighEventTrigger    ::= INTEGER {
                                                start(1),
                                                stop(2)
                                                }

EgpNeighMode    ::= INTEGER {
                                        active(1),
                                        passive(2)
                                        }

EgpNeighState   ::= INTEGER {



OIM Working Group                                              [Page 49]



RFC 1214                       MIB-II-OIM                     April 1991


                                        idle(1),
                                        acquisition(2),
                                        down(3),
                                        up(4),
                                        cease(5)
                                        }

Integer         ::= INTEGER

Integer128      ::= INTEGER (0..127)

Integer64k      ::= INTEGER (0..65535)

IfAdminStatus   ::= INTEGER {
                                        up(1),  -- ready to pass packets
                                        down(2),
                                        testing(3)  -- in some test mode
                                        }

IfOperStatus    ::= INTEGER {
                                        up(1),  -- ready to pass packets
                                        down(2),
                                        testing(3)  -- in some test mode
                                        }

IfType INTEGER {
                                   other(1),  -- none of the following
                                   regular1822(2),
                                   hdh1822(3),
                                   ddn-x25(4),
                                   rfc877-x25(5),
                                   ethernet-csmacd(6),
                                   iso88023-csmacd(7),
                                   iso88024-tokenBus(8),
                                   iso88025-tokenRing(9),
                                   iso88026-man(10),
                                   starLan(11),
                                   proteon-10Mbit(12),
                                   proteon-80Mbit(13),
                                   hyperchannel(14),
                                   fddi(15),
                                   lapb(16),
                                   sdlc(17),
                                   ds1(18),
                                   e1(19),  -- european equivalent
                                            -- of T-1
                                   basicISDN(20),
                                   primaryISDN(21),



OIM Working Group                                              [Page 50]



RFC 1214                       MIB-II-OIM                     April 1991


                                            -- proprietary serial
                                   propPointToPointSerial(22),
                                   ppp(23),
                                   softwareLoopback(24),
                                   eon(25),  -- CLNP over IP
                                   ethernet-3Mbit(26),
                                   nsip(27),  -- XNS over IP
                                   slip(28),  -- generic SLIP
                                ultra(29),  -- ULTRA technologies
                                ds3(30),  -- T-3
                                sip(31),  -- SMDS
                                frame-relay(32)
                           }

IpForwarding    ::= INTEGER {
                                forwarding(1),  -- acting as a gateway
                                not-forwarding(2)  -- NOT acting as
                                                   -- a gateway
                                        }

IpNetToMediaType ::= INTEGER {
                                        other(1),  -- none of the
                                                   -- following
                                        invalid(2),  -- an invalidated
                                                     -- mapping
                                        dynamic(3),
                                        static(4)  }

IpRouteProto    ::= INTEGER {
                                        other(1),  -- none of the
                                                   -- following
                                        local(2),  -- configured entries
                                        netmgmt(3),  -- mgmt protocol
                                        icmp(4),  -- obtained via ICMP,
                                                  -- e.g., redirect
                                        egp(5),
                                        ggp(6),
                                        hello(7),
                                        rip(8),
                                        is-is(9),
                                        es-is(10),
                                        ciscoIgrp(11),
                                        bbnSpfIgp(12),
                                        ospf(13),
                                        bgp(14)
                                        }





OIM Working Group                                              [Page 51]



RFC 1214                       MIB-II-OIM                     April 1991


IpRouteType     ::= INTEGER {
                                        other(1),  -- none of the
                                                   -- following
                                        invalid(2),  -- an invalidated
                                                     -- route
                                        direct(3),  -- route to directly
                                                    -- connected
                                                    -- subnetwork
                                        indirect(4)  -- route to a
                                                     -- non-local
                                                     -- host/network/
                                                     -- subnet
                                        }






































OIM Working Group                                              [Page 52]



RFC 1214                       MIB-II-OIM                     April 1991


ObjectId        ::= OBJECT IDENTIFIER

OctetString     ::= OCTET STRING

PhysAddress     ::= OCTET STRING

PrintString     ::= DisplayString (SIZE (0..255))

DisplayString   ::= OCTET STRING
--
-- DisplayString is restricted to the NVT ASCII character set as
-- defined in pages 10-11 of RFC 854 "TELNET Protocol
-- Specification", May 1983 [15].
--
--  SNMP trap syntax

SnmpEnableAuthenTraps   ::= INTEGER {
                                                enabled(1),
                                                disabled(2)
                                                }

SnmpTrapInfo ::= SEQUENCE {
        enterprise                      -- type of device generating
                                        -- event
                                        -- see sysObjectId
                                        OBJECT IDENTIFIER,
        agent-addr              -- address of device generating
                                        -- the event
                                        NetworkAddress,
        generic-trap INTEGER {coldStart (0),
                                        warmStart (1),
                                        linkDown (2),
                                        linkUp (3),
                                        authenticationFailure (4),
                                        egpNeighborLoss (5),
                                        enterpriseSpecific (6) },
        specific-trap INTEGER   OPTIONAL, -- enterprise specific
        variable-bindings   VarBindList OPTIONAL}

VarBindList ::= SEQUENCE OF VarBind

VarBind ::=     SEQUENCE {
                                name    ObjectName,
                                ovalue  ObjectSyntax}

TcpConnState    ::= INTEGER {
                                        closed(1),
                                        listen(2),



OIM Working Group                                              [Page 53]



RFC 1214                       MIB-II-OIM                     April 1991


                                        synSent(3),
                                        synReceived(4),
                                        established(5),
                                        finWait1(6),
                                        finWait2(7),
                                        closeWait(8),
                                        lastAck(9),
                                        closing(10),
                                        timeWait(11),
                                        deleteTCP(12) }

TcpRtoAlgorithm  ::= INTEGER {
                                        other(1),  -- none of the
                                                   -- following
                                        constant(2),  -- a constant rto
                                        rsre(3),  -- MIL-STD-1778,
                                                  -- Appendix B
                                        vanj(4)  -- Van Jacobsons alg.
                                          }

END

9.  Acknowledgements

   The editor acknowledges the contributions of the members of the OIM
   working group.  Particular thanks are made to the following for their
   comments and assistance:

        Marvin Solomon,  University of Wisconsin
        Nancy Hall,  University of Wisconsin
        Subhendu Ghatak,  University of Tennessee at Knoxville




















OIM Working Group                                              [Page 54]



RFC 1214                       MIB-II-OIM                     April 1991


References

    1. ISO 8824: Information Processing - Open System Interconnection -
       Specification of Abstract Syntax Notation One (ASN.1), February
       1989.

    2. ISO/IEC 7498-4, Information Processing Systems- Open Systems
       Interconnection - Basic Reference Model Part 4 - OSI Management
       Framework.

    3. Warrier, U., Besaw, L., and LaBarre, L., and B. Handspicker, "The
       Common Management Information Services and Protocol for the
       Internet (CMOT and CMIP)", RFC 1189, Netlabs, Hewlett-Packard,
       The Mitre Corporation, Digital Equipment Corporation, October
       1990.

    4. ISO/IEC DIS 10165-1, Information Processing Systems - Open
       Systems Interconnection-Structure of Management Information -
       Part 1: Management Information Model, July 1990.

    5. ISO/IEC DIS 10165-2 (ISO/IEC JTC1/SC21 N4072), Information
       Processing Systems -Open Systems Interconnection - Structure of
       Management Information - Part 2: Definition of Management
       Information, July 1990.

    6. ISO/IEC DIS 10165-4 (ISO/IEC JTC1/SC21 N4065), Information
       Processing Systems - Open Systems Interconnection - Structure of
       Management Information - Part 4: Guidelines for the Definition of
       Managed Objects, June 1990.

    7. ISO 9595, Information Processing Systems - Open Systems
       Interconnection - Management Information Service Definition -
       Common Management Information Service, November 1990.

    8. ISO 9596, Information Processing Systems - Open Systems
       Interconnection - Management Information Protocol Specification -
       Common Management Information Protocol, November 1990.

    9. ISO 8649, Information Processing Systems - Open Systems
       Interconnection, Service Definition for the Association Control
       Service Element.

   10. ISO 9072-1, Information Processing Systems - Text Communication,
       Remote Operations: Model, Notation and Service Definition,
       Gloucester, Nov 1987.

   11. Rose, M., and K. McCloghrie, "Structure and Identification of
       Management Information for TCP/IP-based internets", RFC 1155,



OIM Working Group                                              [Page 55]



RFC 1214                       MIB-II-OIM                     April 1991


       Performance Systems International, Hughes LAN Systems, May 1990.

   12. Rose, M., Editor, "Management Information Base for Network
       Management of TCP/IP-based internets: MIB-II", RFC 1158,
       Performance Systems International, May 1990.

   13. Cerf, V., "Report of the Second Ad Hoc Network Management Review
       Group", RFC 1109, NRI, August 1989.

   14. Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple
       Network Management Protocol (SNMP)", RFC 1157, SNMP Research,
       Performance Systems International, Performance Systems
       International, MIT Laboratory for Computer Science, May 1990.

   15. Postel, J., and J. Reynolds, "Telnet Protocol Specification", RFC
       854, USC/Information Sciences Institute, May 1983.

   16. McCloghrie, K., and M. Rose, "Management Information Base for
       Network Management of TCP/IP-based internets: MIB-II", RFC 1213,
       Hughes LAN Systems, Performance Systems International, March
       1991.

   17. Working Implementation Agreements for Open Systems
       Interconnection Protocols, December 1990.



























OIM Working Group                                              [Page 56]



RFC 1214                       MIB-II-OIM                     April 1991


Appendix 1:  Notational Tools for Managed Object Definition

   This section provides descriptions of the notational tools used to
   define the templates defined in this memorandum.  The text is
   excerpted and paraphrased from reference 6.  Only the templates used
   in this document are included here.  For a complete description of
   the notational tools specified for OSI management, see reference 6.

A1.1 Overview of Notational Tools

   The "Templates" defined in this clause provide a common set of tools
   and a common format for the representation of the various aspects of
   a managed object class definition and its associated naming
   structure.  Formal definitions of each template will be found in
   clauses A1.3 -A1.11 inclusive; the syntactic conventions used in
   these formal definitions are specified in clause A1.2.  Examples of
   the use of these tools may be found in Annex A (of 10165-4).

   The structure and behaviour of a managed object class is primarily
   defined by means of the Managed Object Class Template.  This template
   identifies the inheritance relationships that exist between the class
   and other managed object classes, the packages of class specific
   behaviour, the attributes that are associated with the class, the
   notifications that the class may issue and the operations that may be
   performed upon the class.  In order to allow re-use of parts of this
   specification in the specification of other managed object classes,
   additional templates are defined to provide for the specification of
   attributes (individual and group), behaviour, actions, notifications
   and conditional packages.  These other templates are "called up" by
   the Managed Object Class template by means of the referencing
   mechanism defined in clause A1.2; this mechanism allows references to
   be made in one standard to specifications that are contained in other
   standards, hence allowing "generic" specifications to be made
   available for use in managed object class definitions in addition to
   local specifications. Templates may also be included "in-line" if so
   desired.

   The naming of a managed object class is defined by means of the Name
   Binding template.  This template identifies the managed object class
   being named and defines the relative distinguished name that will be
   used to name instances of the class in the context of a particular
   superior class.  This template also provides for the specification of
   relationships that exist between two object classes as a consequence
   of a particular name binding.







OIM Working Group                                              [Page 57]



RFC 1214                       MIB-II-OIM                     April 1991


A1.2 Conventions Used in Template Definitions

   The templates definitions contained in this clause are based on the
   following syntactic conventions:

   - Strings surrounded by [ ] delimit parts of the template that may
     either be present or absent in each instance of use of the
     template. If the closing brace is followed by an asterisk,
     e.g., [ ]*, the contents of the braces may appear zero or more
     times.  The circumstances under which these parts of the
     definition may be omitted or repeated are dependent upon the
     template type;

   - Strings surrounded by < > delimit strings that must be replaced in
     each instance of use of the template.  The structure and meaning
     of the replacement string is dependent upon the string type;

   - Upper case strings denote Keywords which are required to be
     present in each instance of use of the template, unless they are
     enclosed in [ ];

   - The solidus, |, is used to separate alternative strings in the
     template;

   - Spaces and carriage returns are significant only as string
     delimiters;

   - In order to simplify the structure of the templates, particularly
     where the same syntactic structure is repeated in the template
     definitions, supporting syntactic definitions may be defined.  If
     any such supporting syntactic definitions are required in order to
     complete the template definition, these appear following the
     keywords "supporting productions" at the end of the template
     definition. These supporting definitions take the general form

                   definition-label-> syntactic-definition

   where definition-label allows the definition to be referenced by the
   template definition and syntactic-definition gives the expansion of
   the definition, using the above notational rules;

   - The templates themselves have the general structure:

                <template-label>TEMPLATE NAME

        [ELEMENT NAME [<element-definition>] ;]*

        [REGISTERED AS <object-identifier> ;]



OIM Working Group                                              [Page 58]



RFC 1214                       MIB-II-OIM                     April 1991


        [supporting productions

        [<definition-label> -> <syntactic-definition >]*]

   Each instance of use of a template therefore declares a template-
   label by which that instance may be referenced from other templates,
   and if the REGISTERED AS clause is present, assigns a value of an
   ASN.1 OBJECT IDENTIFIER under which the instance has been registered;

   - Semicolons are used to mark the end of each distinct element in
     the template.  In an instance of use of the template, any text
     inserted between a semicolon and the next valid keyword is
     assumed to be a comment;

   - The notation used for representing object identifiers is the
     normal notation defined in ASN.1 for object identifier values;
     i.e., the production:

        object-identifier-> <ASN.l ObjectIdentifierValue notation>

        is assumed to be a supporting production for all template
        definitions in this document;

   - Further definitions, such as the nature of the element definitions,
     follow the syntactic definition of the template;

   - Template labels shall be unique within the standard or document
     in which they are declared.  Where a template-label is declared in
     document A and referenced in document B, the reference in
     document B shall be prefixed by the globally unique name of
     document A.  In the case of documents named by an
     internationally recognized naming authority such as
     [CCITT|ISO/IEC], the registered name of the document shall be
     used as the identifier, such as [Recommendation X.722|ISO/IEC
     10165-4]. Where a globally unique name is not already available,
     it is permissible to assign the value of an OBJECT IDENTIFIER to
     the referenced document, and use this value as a globally unique
     document name.  The syntax of a template-label, defined using the
     above notation, is defined as follows:

        [<document-identifier> :] < label-string>

        document-identifier-> "<standard-name>" | <object-identifier>

   A label-string may include any number of the following characters:

        -       upper or lower case alphabetic characters;




OIM Working Group                                              [Page 59]



RFC 1214                       MIB-II-OIM                     April 1991


        -       the digits 0-9;

        -       the hyphen character (-);

   in any order, commencing with a lower case character.  For example,
   the following template-label:

        "ISO/IEC 10165/4":exampleObjectClass

   constitutes a globally unique label for the definition of
   exampleObjectClass contained in Annex A of 10165-4.

   Label references that are not prefixed by a document-identifier are
   assumed to refer to labels declared in the document in which the
   reference appears.

   -  Whenever a template-label is present in a template as a
      pointer to another template, it may be replaced by the entire
      text of the referenced template itself (including the
      template's label).

A1.3  Managed Object Class Template

A1.3.1  Overview

   The Managed Object Class template forms the basis of the formal
   definition of a managed object.  Elements in the template allow the
   class to be placed at the appropriate node of the inheritance tree,
   the various attributes of the class to be specified, and the
   behaviour of the class to be defined.  The major elements of the
   definition are:

   - Inheritance.  Each managed object class defines the
     superclass(es) from which it has been derived.  All
     characteristics of the superclass(es) are inherited by the
     subclass; the subclass definition may add to these
     characteristics (refinement) but may not remove any
     characteristics of the superclass. Ultimately, all classes are
     subclasses of TOP;

   - Allomorphs.  If the class supports allomorphism, the set of
     classes that are legitimate allomorphic views of the class must
     be defined.  These classes must all be superclasses of the class
     being defined;

   - Mandatory Packages.  The managed object class definition
     includes the packages of behaviour, attributes, operations and
     notifications that provide a complete specification of the



OIM Working Group                                              [Page 60]



RFC 1214                       MIB-II-OIM                     April 1991


     behaviour that is common to all instances of the class;

   - Conditional Packages.  The managed object class definition
     includes the specification of packages of behaviour, attributes,
     operations and notifications that are present or absent in
     instances of that class as a consequence of a specified condition;

   Note: Attributes, Operations and Notifications that form part of a
   class definition may only be omitted from an instance of that class
   if they are defined as features of a Conditional Package and are
   omitted in accordance with the condition defined for that package.

   - Class Naming. The managed object class definition must include a
     class name which may be used to refer to the class in CMIP.  This
     is achieved by registration of an Object Identifier value which
     corresponds to the class.

A1.3.2 Template Structure

   <class-label> MANAGED OBJECT CLASS

           [DERIVED FROM   <class-label>
                   [, <class-label>]*;
           ]
           [ALLOMORPHIC SET        <class-label>
           [, < class-label > ] *;
           ]
    [CHARACTERIZED BY <package-label>[,<package-label>]*;
    ]
    [CONDITIONAL PACKAGES <package-label> PRESENT IF
                                           <condition-definition>
                                           [,<package-label> PRESENT IF
                                            <condition-definition>]*;
    ]
    [PARAMETERS <parameter-label> [,<parameter-label>]*;
    ]

   REGISTERED AS < object-identifier>;

A1.3.3 Supporting Definitions

   DERIVED FROM <class-label>[,<class-label>]*

   The DERIVED FROM clause shall be present in all managed object class
   definitions other than "top".  It is therefore the case that "top" is
   a superclass of all classes other than itself.

   The class-label identifies a managed object class from which the



OIM Working Group                                              [Page 61]



RFC 1214                       MIB-II-OIM                     April 1991


   managed object class has been derived; i.e., a managed object class
   which is one of the object class's parents in the inheritance
   hierarchy.  As multiple inheritance is permitted, a managed object
   class may have one or more parent classes.

   The process of inheritance (specialization) requires all the
   characteristics of the superclass(es) other than DERIVED FROM and
   ALLOMORPHIC SET to be included in the definition of the subclass.  If
   it is intended that the subclass be allomorphic, the definition of
   the subclass shall include a ALLOMORPHIC SET clause that explicitly
   defines the set of classes that the subclass is allomorphic to.

   Where multiple inheritance results in the same element definition
   being multiply imported (as could happen, for example, if two parent
   superclasses contain the same attribute), the subclass is assumed to
   contain a single copy of the definition concerned.

   Characteristics that are inherited from a superclass shall not be
   repeated in the documentation of the subclass unless one of the
   techniques described in ISO/IEC 10165-4 for extending or modifying an
   element of the superclass is being used.  The DERIVED FROM clause is
   therefore presumed to automatically import all inheritable elements
   of definition from the superclass definition(s).  There may be
   augmented or modified by elements defined within the CHARACTERISED
   BY, CONDITIONAL PACKAGES, and PARAMETER constructs.

   ALLOMORPHIC SET <class-label>[,<class-label>]*

   The Allomorphic Set allows a set of superclasses to be identified
   that are "backwards compatible" with the managed object class. Thus,
   if managed object class A identifies classes B and C as members of
   its allomorphic set, it is possible to operate on an instance of
   class A as if it were an instance of class B or C.  The definition of
   allomorphic forms allows, for example, the definition of enhanced
   versions of a managed object class that are backwards compatible with
   previous versions.  The class label shall identify the class-label of
   a managed object class definition that is a superclass of the managed
   object class that is being defined.

   CHARACTERIZED BY <package-label>[,<package-label]*

   This construct, if present, allows one or more mandatory packages of
   behaviour, attributes, operations, and notifications to be included
   in the managed object class definition, in addition to those that are
   present as a result of the Derived From construct.

   CONDITIONAL PACKAGES <package-label>  PRESENT IF <condition-
   definition>[, <package-label>  PRESENT IF <condition-definition>]*



OIM Working Group                                              [Page 62]



RFC 1214                       MIB-II-OIM                     April 1991


   Present if one or more conditional packages are to be included in the
   managed object class definition.  The package-label identifies the
   package definition that is applicable.  The condition-definition is a
   description of the condition that, if true, requires that the package
   be included in an instance of the class.  The condition shall refer
   to a documented feature of the definition of the underlying resource
   or a related standard which is permitted to be present or absent in
   an implementation.

   PARAMETERS <parameter-label>[,<parameter-label>]*

   If present, this construct permits the definition of parameters to be
   included in the object class definition in addition to any inherited
   parameters.

   REGISTERED AS <object-identifier>

   The object identifier value provides a globally unique identifier for
   the object class definition.  This value is used in the management
   protocol when it is necessary to identify the object class.

A1.4  Package Template

   This template allows a package of behaviour definitions, attributes,
   operations and notifications to be defined for subsequent insertion
   into a managed object class template under the Characterized By and
   Conditional Packages constructs.  The major elements of the
   definition are:

   - Behaviour. The managed object class definition provides a
     complete specification of the behaviour of the object.  This
     includes:

      - The effect of the Operations upon the managed object;

      - Any constraints that are placed on operations in order to
        satisfy consistency rules, and in particular, the rules under
        which Creation and Deletion of managed objects may be
        performed and the consequences of these operations;

      - A specification of how instances of a managed object class
        interact with each other, related, managed objects of the same
        or different classes.

      - A complete definition of any other aspects of the
        behaviour of the managed object class.

      - Contained attributes.  The set of attributes that the



OIM Working Group                                              [Page 63]



RFC 1214                       MIB-II-OIM                     April 1991


        package contains must be defined;

      - Operations and Notifications.  The package definition
        specifies which notifications instances of the class that make
        use of this package shall be able to generate, which operations
        instance of the class shall be capable of performing, and in the
        case of attribute related operations, which attributes shall be
        available to be operated upon.

   Note: The operations identified in the package definition are the
   operation types defined in the Information Model (Get, Replace, Set
   to Default,...etc).  In the case of Actions and Notifications,
   further definitions are required in order to characterise their
   functionality, as described in clauses A1.10, A1.11.  The create and
   delete operations are defined as part of the Name Binding template
   described in clause A1.6, a creation and deletion of an object is
   closely bound to the containment relationship between superior and
   subordinate objects, rather than to all instances of a managed object
   class.

A1.4.1 Template Structure

< package-label> PACKAGE

[BEHAVIOUR DEFINITIONS  < behaviour-definition-label>
        [, < behaviour-definition-label > ] *;
]
[ATTRIBUTES<attribute-label> <propertylist>[<parameter-label>]
        [,< attribute-label> < propertylist> [< parameter-label> ]*]*;
]
[ATTRIBUTE GROUPS       <group-label> [<attribute-label>]*
                          [, < group-label > [ < attribute-label > ]*]*;
]
[ACTIONS        <action-label>[<parameter-label>]*
                          [, < action-label > [ < parameter-label > ]*]*;
]
[NOTIFICATIONS             <notification-label> [<parameter-label>]*
                    [, < notification-label > [< parameter-label >]*]*;
]
[REGISTERED AS < object-identifier>];

supporting productions

propertylist -> [REPLACE WITH DEFAULT]
        [DEFAULT VALUE < value-definition > ]
        [PERMITTED VALUES <value-set-syntax-label>]
        [REQUIRED VALUES        <value-set-syntax-label>]
        [GET | REPLACE | GET-REPLACE]



OIM Working Group                                              [Page 64]



RFC 1214                       MIB-II-OIM                     April 1991


        [ADD | REMOVE | ADD-REMOVE]

A1.4.2 Supporting Definitions

   BEHAVIOUR DEFINITIONS < definition-label> [,<definition-label>]*

   Behaviour Definitions allow the behaviour (semantics) of the managed
   object class to be completely described.  These definitions relate
   the external view of the object (its operations and notifications) to
   its internal operation.  The definition-label identifies an instance
   of use of the Behaviour template.

   Note:  It should not be assumed that the behaviour defined by this
   clause is testable using existing conformance test technology.

   ATTRIBUTES.  <attribute-label><propertylist> [<parameter-label>]*
           [,<attribute-label><propertylist> [<parameter-label>]*]*

   This allows attributes to be included in the package definition. The
   propertylist that follows each attribute label defines the set of
   operations that may be performed on the managed object with reference
   to the attribute, and defines any default, permitted or required
   value(s) associated with the attribute.  The Replace With Default
   property is included if the property has a default value that may be
   set by means of the Replace With Default Value operation.  The
   value-definition used to specify the default value shall be a value
   reference name, using the Externaltypereference notation defined in
   ISO 8824.

   If the PERMITTED VALUES property is present, the value-set- syntax-
   label specifies any restrictions on the possible values that the
   attribute may take.  The value-set-syntax-label shall be a type
   reference name, using the ExternaltypeReference notation defined in
   ISO 8824.  The form of the specification referenced shall be a
   subtype of the attribute syntax type, defined using the ASN.1 subtype
   notation.

   Note:  The Permitted Values construct is required only in attribute
   definitions where it is necessary to specify a restriction on the
   value set permitted by the specification of the Attribute Syntax,
   e.g., when modifying an existing attribute specification.

   If the REQUIRED VALUES property is present, the value-set- syntax-
   label specifies any restrictions on the possible values that the
   attribute may take.  The value-set-syntax-label shall be a type
   reference name, using the ExternaltypeReference notation defined in
   ISO 8824.  The form of the specification referenced shall be a
   subtype of the attribute syntax type, defined using the ASN.1 subtype



OIM Working Group                                              [Page 65]



RFC 1214                       MIB-II-OIM                     April 1991


   notation.

   Note:  This property defines the value set required for conformance.

   The parameter-labels allow parameters to be associated with the
   operations permitted on the attribute.

   ATTRIBUTE GROUPS <group-label> [<attribute-label>]*[,<group-label>
   [<attribute-label>]*]*

   This allows a set of attributes groups to be identified as part of
   the package.  The original definition of an attribute group may be
   extended by the addition of further attribute-labels.

   ACTIONS <action-label>[<parameter-label>]*
           [,<action-label>[<parameter-label>]*]*

   If present, the action-labels identify the set of action definitions
   that are included in the package.  The behaviour definitions shall
   specify the effect of these Actions upon managed objects.

   The parameter-labels allow parameters to be associated with the
   Action.

   NOTIFICATIONS <notification-label>[<parameter-label>]*
                   [,<notification-label>[<parameter-label>]*]*

   Present if any Notifications are included in the package. The
   notification labels identify the Notification definitions that are
   applicable.  The behaviour definitions shall specify the
   circumstances under which those Notifications are generated by a
   managed object.

   The parameter-labels allow parameters to be associated with the
   Notification.

   REGISTERED AS <object-identifier>

   The object identifier value, if present, provides a globally unique
   identifier for the package definition, and registers the groupings of
   behaviour definitions, attributes, attribute groups, actions and
   notifications that the package defines.  This value is required in
   cases where the package is referenced by a conditional packages
   construct in an object class template and the package contains a
   behaviour construct or more than one element, in which case the value
   of the object identifier is included in the conditional packages
   attribute of any instances of the object class that are created with
   the package present.



OIM Working Group                                              [Page 66]



RFC 1214                       MIB-II-OIM                     April 1991


A1.5 Parameter Template

   This template permits the specification and registration of parameter
   syntaxes and associated behaviour that may be associated with
   particular operations and notifications within the managed object
   class and conditional package templates defined in clauses A1.3 and
   A1.4.  This mechanism is not used in the OIM MIB-II.

A1.6  Name Binding Template

A1.6.1  Overview

   This template allows alternative naming structures to be defined for
   managed objects of a given managed object class by means of name
   bindings.  The name binding allows an attribute to be selected as the
   naming attribute for a given subordinate class/superior class pair.

   The attribute selected must be an attribute of the subordinate object
   that is present in all instances of the specified managed object
   class.  This attribute is used for the purpose of constructing the
   relative distinguished name (RDN) of subordinate objects of that
   class.  An RDN is constructed from the OBJECT IDENTIFIER assigned to
   that attribute type and the value of the instance of the attribute.
   The Distinguished Name of the subordinate object is obtained by
   appending its RDN to the Distinguished Name of its superior object.

   Name bindings are not considered to be part of the definition of
   either of the managed object classes that they reference.  A given
   managed object class may have more than one name binding associated
   with it.  The set of name bindings defines the set of possible naming
   relationships with superior managed objects and the set of managed
   object classes from which subordinate object classes may be
   instantiated.

   Note: Name Bindings may be specified for a managed object class
   subsequent to the specification of the managed object class itself.

A1.6.2  Template Structure

   <name-binding-label> NAME BINDING

   SUBORDINATE OBJECT CLASS <class-label>;
   NAMED BY
   SUPERIOR OBJECT CLASS    <class-label>;
   WITH ATTRIBUTE       <attribute-label>;
   [BEHAVIOUR     <behaviour-definition-label>
                                   [,<behaviour-definition-label>]*;
   ]



OIM Working Group                                              [Page 67]



RFC 1214                       MIB-II-OIM                     April 1991


    [CREATE [<create-modifier>[,<create-modifier>]]
                                                   [<parameter-label>]*;
    ]
    [DELETE                <delete-modifier>[<parameter-label>]*;
    ]

   REGISTERED AS < object-identifier>;

   supporting productions

   create-modifier->       with-reference-object |
                           with-automatic-instance-naming

   delete-modifier ->      only-if-no-contained-objects |
                                   deletes-contained-objects

A1.6.3  Supporting Definitions

   SUBORDINATE OBJECT CLASS <class-label>

   This defines the managed object class being named.  The name of an
   instance of the subordinate managed object class is constructed by
   concatenating the distinguished name of the superior managed object
   class with the relative distinguished name of the subordinate managed
   object class.

   NAMED BY SUPERIOR OBJECT CLASS <class-label>

   This defines a managed object class that may contain instances of the
   subordinate managed object class.

   WITH ATTRIBUTE <attribute label>

   This defines the attribute that shall be used, in the context of this
   name binding, to construct the relative distinguished name for the
   subordinate managed object class.  Values of this attribute shall be
   represented by single-valued data types, complying with the
   restrictions specified in ISO 10165-1;  if no naturally suitable
   attribute is available for use as a naming attribute, object
   designers are encouraged to provide a naming attribute of type
   Graphic String.

   BEHAVIOUR <behaviour-definition-label>

   If present, this clause permits any behavioural impact imposed as a
   consequence of the name binding to be defined.  The behaviour-
   definition-label identifies the constraint definition concerned; the
   constraint is therefore expressed using the behaviour template.



OIM Working Group                                              [Page 68]



RFC 1214                       MIB-II-OIM                     April 1991


   CREATE  [<create-modifier>[,<create-modifier>]][<parameter-label>]*

   Present if it is permitted to create new instances of the managed
   object class referenced by the SUBORDINATE OBJECT CLASS construct in
   the context of this name binding, by means of systems management
   operations.  The create-modifier values specify the options available
   on creation.  The permitted create- modifiers are as follows:

      - with reference-object.  If present, a reference object may be
        specified on creation as a source of default values and to
        specify choice of Conditional Packages;

      - with automatic  instance  naming.  If present, the CREATE
        request may omit to specify the instance name of the new
        object instance.  The behaviour definitions shall specify what
        course of action is taken when there is a choice of Name Forms
        that may be applied to the new object instance.

   If neither create-modifier is specified, the instance name and all
   necessary default values shall be specified in the CREATE request.

   The parameter-labels allows parameters to be associated with the
   CREATE operation.

   DELETE <delete-modifier> [<parameter-label>]*

   Present if it is permitted to delete instances of the managed object
   class referenced by the SUBORDINATE OBJECT CLASS construct in the
   context of this name binding.  The delete- modifier indicates the
   behaviour of a managed object of that class if the managed object is
   deleted.  The permitted delete-modifiers are:

      - only-if-no-contained-objects.  If specified, any contained
        managed objects must be explicitly deleted prior to deletion of
        the containing managed object, i.e., a DELETE request will cause an
        error if there are contained managed objects;

      - delete-contained-objects.  If specified, a DELETE request
        applied to an instance of the managed object class has the effect
        of deleting contained objects also.

   If there are constraints on deletion relative to other relationships
   or conditions, these are specified as part of the behaviour of the
   managed object class.

   The parameter-labels allows parameters to be associated with the
   DELETE operation.




OIM Working Group                                              [Page 69]



RFC 1214                       MIB-II-OIM                     April 1991


A1.7 Attribute Template

A1.7.1  Overview

   This template is used to define individual attribute types. These
   definitions may be further combined by the Attribute Group template
   where attribute groups are required.  The major elements of the
   definition are:

      - Derivation.  The definition of an attribute type may modify or
        constrain the definition of another attribute type.

      - Attribute Syntax.  The definition of an attribute type must
        include the definition of the syntax that will be used to convey
        values of the attribute in CMIP.  This definition is achieved by
        means of a reference to an ASN.l Type Definition.  The
        definition of an attribute syntax indicates whether the
        attribute value is a single or set-valued attribute type.  If
        the base type is SET OF, the attribute is a set-valued type,
        otherwise it is a single-valued type;

      - Value Matching.  The definition of an attribute type may
        include the valid ways in which the value of an instance of the
        type may be tested, i.e., whether the attribute may be tested
        for equality, magnitude, etc..  Value matching on some attribute
        types may require the specification of how a matching rule is
        defined to operate, as part of the attribute's behaviour
        definition.  The absence of any matching rules in the attribute
        definition implies that matching of values is undefined;

      - Behaviour.  The attribute definition may include definition of
        attribute specific behaviour; i.e., behaviour that applies to an
        attribute type regardless of which managed object class contains
        instances of tho attribute type;

      - Attribute type name.  An Object Identifier value shall be
        allocated to each attribute that is to be included in the
        definition of a managed object class. This value is used in CMIP
        to identify the attribute.

A1.7.2 Template Structure

      <attribute-label> ATTRIBUTE

      derived-from-construct | with attribute-syntax-construct
      [MATCHES FOR    <qualifier>[,<qualifier>]* ;]
      [BEHAVIOUR      <behaviour-definition-label>
                      [,<behaviour-definition-label>]* ;



OIM Working Group                                              [Page 70]



RFC 1214                       MIB-II-OIM                     April 1991


      ]
      [PARAMETERS     <parameter-label>
                      [,<parameter-label>]*
      ]

      [REGISTERED AS < object-identifier> ;]

      supporting productions

      qualifier -> Equality | Ordering | Substrings
                   | Set Comparison | Set Intersection

      derived-from-construct -> DERIVED FROM  <attribute-label > ;

      with-attribute-syntax-construct -> WITH ATTRIBUTE SYNTAX
                                      <syntax-label> ;

A1.7.3 Supporting Definitions

   DERIVED FROM <attribute-label>

   If this element is present, the attribute definition takes as a
   starting point all aspects of the definition referenced by
   attribute-label, including any that it may in turn have derived from
   other attribute definitions.  The rules for interpreting the effect
   of presence of any of the other elements of the attribute template
   under these circumstances are as follows:

      - WITH ATTRIBUTE SYNTAX is not permitted to be present.  The
        attribute syntax shall be the attribute syntax of the attribute
        from which this attribute has been derived.;

      - MATCHES FOR: The resultant set of matching rules shall be the
        logical OR of the matching rules specified by this construct
        with any derived matching rules;

      - BEHAVIOUR is assumed to extend any derived behaviour
        definitions;

      - REGISTERED AS is assumed to replace any registration derived
        from other definitions.

   This derivation mechanism permits:

      - The definition of an attribute based on an existing attribute
        definition;

      - The addition of further constraints to an existing attribute



OIM Working Group                                              [Page 71]



RFC 1214                       MIB-II-OIM                     April 1991


        definition.

   WITH ATTRIBUTE SYNTAX <syntax label>

   This element, present only if the DERIVED FROM construct is absent,
   identifies the ASN.1 data type that describes how instances of the
   attribute value are carried in protocol.  The syntax-label shall be
   an ASN.l Externaltypereference.

   The ASN.1 data type also defines the data type of the attribute
   itself.  If the base type of the syntax is set-of, the attribute is a
   set-valued attribute.  All other ASN.l data types, including set,
   sequence of, and sequence type, define single-valued attribute types.

   MATCHES FOR <qualifier>[,<qualifier>]*

   This element defines the types of test that may be applied to a value
   of the attribute as part of a Filter operation. Matching for the
   presence of an attribute is implicitly permitted for all attributes.
   For all other types of matching, if this clause is not present,
   matching is undefined and is therefore not permitted on the
   attribute.  The options are:

      - Equality.  If present, the attribute value may be tested for
        equality against a given value;

      - Ordering.  If present, the attribute value may be tested against
        a given value in order to determine which has the greater
        value;

      - Substrings.  If present, the attribute value may be tested
        against a given substring value in order to determine its
        presence or absence in the attribute value;

      - Set Comparison.  If present, the attribute value may be tested
        against a given value in order to determine set equality or
        subset/superset relationships between the values;

      - Set Intersection.  If present, the attribute value may be tested
        against a given value in order to determine the presence or
        absence of a non-null set intersection between the two values.

   BEHAVIOUR <behaviour-definition-label>
                   [,<behaviour-definition-label>]*

   Any behaviour that is generic to this attribute type may be defined
   by means of this behaviour clause.  The behaviour definition shall
   include any additional specification that is required in order to



OIM Working Group                                              [Page 72]



RFC 1214                       MIB-II-OIM                     April 1991


   define how the chosen set of matching rules are applied to the
   attribute definition.  Behaviour that is specific to the managed
   object class is defined in the behaviour clause of the managed object
   class template.

   Note:  It should not be assumed that the behaviour defined by this
   clause is testable using existing conformance test technology.

   REGISTERED AS <object-identifier>

   If present, the object-identifier provides a globally unique
   identifier for the attribute definition;  this includes all elements
   referenced either directly, or indirectly by the Derived From, With
   Attribute Syntax, Matches For and Behaviour constructs, where
   present.  This value is used in the management protocol when it is
   necessary to identify the attribute type.  If this construct is
   omitted, the attribute definition shall not be referenced in a
   managed object class definition without further constraints being
   applied in another attribute definition.

A1.8  Notification Template

A1.8.1 Overview

   This template is used to define the behaviour and syntax associated
   with a particular Notification type.  The main features of the
   definition are as follows:

      - Behaviour.  The definition of a Notification type must specify
        the circumstances under which a notification of the type is
        generated;

      - Mode of operation.  The definition of a notification type shall
        indicate whether the notification may be confirmed,
        unconfirmed or both;

      - Syntax Definitions.  The definition of the Notification type
        must specify any syntax that will be used to convey the CMIS
        Event Information and Event Reply parameters in CMIP.  These
        syntaxes are defined by means of ASN.1 data types.  The
        template also permits the allocation of attribute values to
        fields in the syntax;

      - Notification naming.  The value of the Object Identifier
        associated with the Notification definition is used to identify
        the Event type in CMIP.





OIM Working Group                                              [Page 73]



RFC 1214                       MIB-II-OIM                     April 1991


A1.8.2  Template Structure

      <notification-label> NOTIFICATION

      BEHAVIOUR       <behaviour-definition-label>
                                      [,<behaviour-definition-label>]*;
      MODE    <confirmation-mode>;
      [PARAMETERS  <parameter-label>[,<parameter-label]*;
      ]
      [WITH INFORMATION SYNTAX <syntax-label>
                      [AND ATTRIBUTE IDS <field-name><attribute-label>
                                      [,<field-name><attribute-label]*];
      ]
      [WITH REPLY SYNTAX <syntax-label>;]

      REGISTERED AS <object-identifier>;

      supporting productions

      confirmation-mode -> CONFIRMED | NON-CONFIRMED | CONFIRMED AND
      NON-CONFIRMED

A1.8.3  Supporting Definitions

   BEHAVIOUR <behaviour-definition-label>

   This defines the behaviour of the notification, the data that must be
   specified with the notification, the results that the notification
   may generate and their meaning.  The behaviour- definition-label
   references a behaviour description defined by use of the Behaviour
   Template.

   Note:  It should not be assumed that the behaviour defined by this
   clause is testable using existing conformance test technology.

   MODE CONFIRMED | NON-CONFIRMED | CONFIRMED AND NON-CONFIRMED

   This defines the allowable mode of operation of the notification
   type, as follows:

        - CONFIRMED:  The notification type shall operate in the
                confirmed mode only;

        - NON-CONFIRMED:  The notification type shall operate in the
                non-confirmed mode only;

        - CONFIRMED AND NON-CONFIRMED:  The notification type may
                operate in either confirmed mode or non-confirmed mode.



OIM Working Group                                              [Page 74]



RFC 1214                       MIB-II-OIM                     April 1991


   PARAMETERS  <parameter-label>[,<parameter-label>]*

   The parameter-labels allow parameters to be associated with with the
   behaviour of the attribute type.

   WITH INFORMATION SYNTAX <syntax-label> [AND ATTRIBUTE IDS
   <field-name><attribute-label> [,<field-name><attribute-label>]*;]

   This construct identifies the ASN.l data type that describes the
   structure of the notification information that is carried in
   management protocol, and permits the association of attribute
   identifiers with named fields in the abstract syntax.  The syntax-
   label shall be a type reference name, using the Externaltypereference
   notation defined in ISO 8824.  If absent, there is no information
   associated with the notification invocation.  If the AND ATTRIBUTE
   IDS option is used, the field- name label shall be a label defined
   within the abstract syntax referenced by the syntax that appears in
   the construct.  The data type that is labeled by the field-name is
   used to carry values of the attribute referenced by attribute-label.
   The ASN.1 data type of the attribute shall be the same as the data
   type referenced by field-name.

   WITH REPLY SYNTAX <syntax-label>

   If a syntax-label is present, this identifies the ASN.1 data type
   that describes the structure of the notification reply that is
   carried in management protocol.  The syntax-label shall be a type
   reference name, using the Externaltypereference notation defined in
   ISO 8824.  If absent, there is no information associated with the
   notification reply.





















OIM Working Group                                              [Page 75]



RFC 1214                       MIB-II-OIM                     April 1991


Appendix 2:  New Objects: Internet SMI Object Type Macros

   atEntryId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
       "<index>.1.<address>, where <index is the decimal representation
        of atIfIndex and <address> is atNetAddress represented in
        dot notation.  The 1 is a subidentifier indicating that an IP
        address follows. "
                 ::= { attributes 3}

   atTableId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
                   "An empty string."
                 ::= { attributes 2}


   egpId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
                   "An empty string."
                 ::= { attributes 16}

   egpNeighEntryId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
                        "egpNeighAddr encoded in dot notation."
                 ::= { attributes 22}

   egpNeighTableId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
                   "An empty string."
                 ::= { attributes 17}

   icmpId OBJECT-TYPE
                 SYNTAX  DisplayString



OIM Working Group                                              [Page 76]



RFC 1214                       MIB-II-OIM                     April 1991


                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
                   "An empty string."
                 ::= { attributes 9}

   ifId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
                   "An empty string."
                 ::= { attributes 23}

   ifEntryId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
                   "The decimal representation of ifIndex."
                 ::= { attributes  21}

   ifTableId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
                   "An empty string."
                 ::= { attributes 1}

   ipAdEntryId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
                   "ipAdEntAddr encoded in dot notation."
                 ::= { attributes 19}

   ipAddrTableId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
                   "An empty string."
                 ::= { attributes 5}






OIM Working Group                                              [Page 77]



RFC 1214                       MIB-II-OIM                     April 1991


   ipId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
                   "An empty string."
                 ::= { attributes 4}

   ipNetToMediaEntryId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
        "<interface>.<address>, where <interface> is the decimal
        representation of ipNetToMediaIndex and <address> is
        ipNetToMediaNetAddress in dot notation."
                 ::= { attributes 8}

   ipNetToMediaTableId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
                   "An empty string."
                 ::= { attributes 7}

   ipRouteEntryId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
           "<dest> , where <dest> is ipRouteDest represented in dot
           notation."
                 ::= { attributes 20}

   ipRoutingTableId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
                   "An empty string."
                 ::= { attributes 6}

   snmpId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION



OIM Working Group                                              [Page 78]



RFC 1214                       MIB-II-OIM                     April 1991


                   "An empty string."
                 ::= { attributes 18}

   tcpConnId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
            "<laddr> . <lport> . <raddr> . <rport>, where
            <laddr> is the dot notation representation of
                   tcpConnLocalAddress,
            <lport> is the decimal representation of tcpConnLocalPort,
            <raddr> is the dot notation representation of
                   tcpConnRemAddress, and
            <rport> is the decimal representation of tcpConnRemPort."
                 ::= { attributes 12}

   tcpConnTableId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
                   "An empty string."
                 ::= { attributes 11}

   tcpId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
                   "An empty string."
                 ::= { attributes 10}

   updEntryId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
           "<index> . <address>, where <index> is the decimal
           representation of atIfIndex and <address> is atNetAddress
           represented in dot notation."
                 ::= { attributes 15}

   udpId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION



OIM Working Group                                              [Page 79]



RFC 1214                       MIB-II-OIM                     April 1991


                   "An empty string."
                 ::= { attributes 13}

   udpTableId OBJECT-TYPE
                 SYNTAX  DisplayString
                 ACCESS  read-only
                 STATUS  mandatory
                DESCRIPTION
                   "An empty string."
                 ::= { attributes 14}









































OIM Working Group                                              [Page 80]



RFC 1214                       MIB-II-OIM                     April 1991


Appendix 3: Supporting Definitions

   The definition of the object class "top", from which all object
   classes are derived, is taken from ISO/IEC DIS 10165-2: Definition of
   Management Information [5].  However, pending progression of that
   document to an International Standard, the object class "top" and its
   associated attributes have been registered here under the oim
   registration arc.

   top     MANAGED OBJECT CLASS
           CHARACTERIZED BY
               topPackage PACKAGE
           BEHAVIOUR DEFINITIONS topBehaviour;
           ATTRIBUTES
                   objectClass     GET,
                   name            GET,
                   allomorphs      GET,
                   nameBindings    GET,
                   packages        GET;;;
   REGISTERED AS {objects 1};

   topBehaviour    BEHAVIOUR
           DEFINED AS
   This is the top level of managed object class hierarchy and
   every other managed object class is a specialization of either
   this generic class (top) or a specialization of a subclass of top.;

   allomorphs ATTRIBUTE
           WITH ATTRIBUTE SYNTAX
                   Top-Syntax.Allomorphs;
                   -- A set of allormorphic superclass identifiers
           MATCHES FOR  Set Comparison, Set Intersection;
   REGISTERED AS {attributes 30};

   name ATTRIBUTE
           WITH ATTRIBUTE SYNTAX InformationFramework.
                                   RelativeDistinguishedName;
                   -- defined in Directory standards
           MATCHES FOR Equality;
   REGISTERED AS {attributes 31};

   nameBindings ATTRIBUTE
           WITH ATTRIBUTE SYNTAX
                   Top-Syntax.NameBindings;
                   -- A set of valid namebindings for this object.
           MATCHES FOR     Set Comparison, Set Intersection;
   REGISTERED AS {attributes 32};




OIM Working Group                                              [Page 81]



RFC 1214                       MIB-II-OIM                     April 1991


   objectClass     ATTRIBUTE
           WITH ATTRIBUTE SYNTAX CMIP-1.ObjectClass;
           MATCHES FOR Equality, Ordering;
   REGISTERED AS {attributes 33};

   packages ATTRIBUTE
           WITH ATTRIBUTE SYNTAX
                   Top-Syntax.Packages;
                   -- The set of optional packages defined for the
                   -- class that are included in this instantiation of
                   -- the object.
           MATCHES FOR Set Comparison, Set Intersection;
   REGISTERED AS {attributes 34};


   Top-Syntax {iso(1) org(3) dod(6) internet(1) mgmt(1) mib(1)
                   oim(9) misc(4) 2}
   DEFINITIONS ::=
   BEGIN

   -- from ISO/IEC DIS 10165-2:Definition of Management Information

   Allomorphs ::=  SET OF OBJECT IDENTIFIER

   NameBindings ::=        SET OF OBJECT IDENTIFIER

   Packages ::=    SET OF OBJECT IDENTIFIER

   -- From Directory InformationFramework

   RelativeDistinguishedName ::= SET OF AttributeValueAssertion

   AttributeValueAssertion ::= SEQUENCE {AttributeType,
                                         AttributeValue}

   AttributeType ::= OBJECT IDENTIFIER

   AttributeValue ::= ANY

   -- From CMIP-1

   ObjectClass ::= CHOICE {globalForm      [0] OBJECT IDENTIFIER,
                                      localForm    [1] INTEGER }
   END

Security Considerations

   Security issues are not discussed in this memo.



OIM Working Group                                              [Page 82]



RFC 1214                       MIB-II-OIM                     April 1991


Author's Address

   Lee LaBarre
   The MITRE Corporation
   Burlington Road
   Bedford, MA 01730

   Phone: (617) 271-8507

   EMail: cel@mbunix.mitre.org









































OIM Working Group                                              [Page 83]


©2018 Martin Webb