Home Articles FAQs XREF Games Software Instant Books BBS About FOLDOC RFCs Feedback Sitemap
irt.Org

Request For Comments - RFC437

You are here: irt.org | RFCs | RFC437 [ previous next ]






Network Working Group                                            E. Faeh
Request for Comments: 437              Computer Systems Laboratory, UCSB
NIC: 13701                                                  30 June 1973


                  DATA RECONFIGURATION SERVICE AT UCSB

   This purpose of this RFC is to announce the availability of the Data
   Reconfiguration Service (DRS) at UCSB, and to describe the use of the
   DRS Time Sharing System.  The DRS is an experiment in a flexible
   means for reformatting Network data streams.  The DRS provides a
   means for coupling processes with different input/output interfaces,
   and carrying out user specified transformations on the data passing
   between them.  Samples of representative uses of the DRS include
   field insertion, field deletion, variable length string processing,
   string length computation, field transposition, character packing and
   unpacking, and character set translations.

   To use the DRS, a user first defines a "form", or a description of
   the reformatting to be performed on data passing between two sockets
   (a form is associated with each unidirectional message path).  DRS
   may then be directed to establish Network connections with the two
   processes involved and to monitor the dialogue between them.  DRS
   receives an input stream from one process, reformats the input
   according to the rules specified by the form, and emits the
   reformatted data as an output stream to the second process.  The two
   processes communicate as if they were directly connected to each
   other.

   Three major components comprise the DRS: a compiler which reduces DRS
   source programs (forms) to a simpler, machine independent instruction
   sequence (object program), an interpreter which executes the object
   program created by the compiler, and an executive program, the DRS
   Time Sharing System, which interfaces the Network user to the DRS.
   Detailed descriptions of the DRS source language and compiler are
   available in the following documents:

      "The Data Reconfiguration Service--An Experiment in Adaptable,
      Process/Process Communications", The Rand Corp., R-860-ARPA,
      November 1971.

      "Data Reconfiguration Service Compiler: Communications Among
      Heterogeneous Computer Centers Using Remote Resource Sharing", The
      Rand Corp.,R-887-ARPA, April 1972.

   The DRS Time Sharing System (DRS/TSS) and its server Telnet are
   currently available and addressable through socket 1281 decimal.
   DRS/TSS interfaces the user to the DRS.  In addition to a subset of



Faeh                                                            [Page 1]



RFC 437           DATA RECONFIGURATION SERVICE AT UCSB         June 1973


   'TENEX-like' executive commands, commands are available for creating
   and storing forms by name, and for invoking the DRS compiler or
   interpreter.  Since both the compiler and the interpreter run
   asynchronously to the DRS/TSS, the user is notified when execution of
   his requests for compilations or interpreting are initiated and
   terminated.  In addition, a diagnostic message is supplied by the
   interpreter whenever it terminates execution of a form.

   When a user connects to DRS/TSS he is allocated an internal TTY
   number by which his terminal is identified.  When the user issues a
   command to invoke the compiler or interpreter, his TTY number and a
   user specified job name are used to uniquely identify the request.
   The jobname is thereafter used to refer to the request.  A Network
   host is specified by host name, or by host number preceded by #.  A
   socket number is specified as an integer, optionally preceded by a
   (decimal) to indicate the radix used.  Decimal is the default radix
   and positive the default sign.  A negative socket number is
   maintained in two's complement form.

   The following control characters are recognized by DRS.  Control A
   (SOH) or rubout (DEL) delete the last character, control V (SYN)
   deletes the last word, control W (ETB) deletes the last phrase, and
   control X (CAN) deletes the entire line.  Control D (EOT) displays
   the current word, control E (ENQ) displays the current phrase, and
   control F (ACK) displays the entire line.  Control Y (EM) displays
   the name of the current phrase.  Command accept is carriage return-
   line feed, or period.  A space will force recognition of the current
   word, and '?' will list the input(s) currently possible.

   The following sections describe the DRS/TSS command syntax. <CA>
   denotes command accept, and brackets [] denote optional information.
   All literal information is enclosed in quotes ''.  Choose one
   alternative form items in parenthesized lists separated by |.

DRS/TSS COMMAND SYNTAX

Commands:

'ATTACH'          <tty no.> <password> <CA>
'BREAK'           (<tty list>|<CA>) <CA>
'COMPILE'         <job name> <formid> <CA>
'CONVERT'         <integer> ['TO'] <base> <CA>
'DEFINE'          <formid> <CA>
'DELETE'          [<file type>] <formid> <CA> <CA>
'DETACH'          <CA> <CA>
'DIRECTORY'       <formid> <CA>
'DISCONNECT'      <CA> <CA>
'FULLDUPLEX'      <CA>



Faeh                                                            [Page 2]



RFC 437           DATA RECONFIGURATION SERVICE AT UCSB         June 1973


'HALFDUPLEX'      <CA>
'HELP'            <CA>
'LINE_AT_A_TIME'  <CA>
'LINK'            ('ENABLE'|'DISABLE'|<tty list>|<CA>) <CA>
'LIST'            [<file type>] <formid> <CA>
'LOGIN'           <userid> <password> <account number> <CA>
'LOGOUT'          <CA>
'MONITOR'         (<tty list>|<CA>) <CA>
'QUIT'            (<job rename>|<CA>) <CA>
'RADIX'           <base> <CA>
'RENAME'          <formid> ['TO'] <formid> <CA>
'RESPONSE'        ('ALL'|HANDHOLD'|'PROMPT'|'NORMAL'|'UNUSUAL'|
                    'ERRORS'|'NONE') <CA>
'RUN'             <job name> ('SIMPLEX' <run parameters>|
                    'DUPLEX' '('<run parameters> <run parameters>
                    ')' ) <CA>
'SELECT'          (<tty list>|<CA>) <CA>
';'               <text> <CA>

Substitutions:

<formid> = ['<' <userid> ',' <password> '>'] <form name>
<base> = ('DECIMAL'|'HEXADECIMAL'|'OCTAL')
<file type> = ('DIAGNOSTICS'|'OBJECT_CODE'|'SOURCE')
<run parameters> = ('SICP' <socket number>|'UICP'
                   [<hostid>] <socket number>|'RFC'[<hostid>]
                   <socket number> [<hostid>] <socket number>)
                   ['BYTE SIZE' <integer>] ['CONNECT_TIME'
                   <integer>] ['RUN_TIME' <integer>] <formid>

Definitions:

<acct no>                   Account number is a character string whose
                            maximum length is 4.

<form name>                 Form name is a character string whose
                            maximum length is 6, and whose first
                            character is alphabetic.

<hostid>                    Host number preceded by '#' or host name
                            may be used to specify a Network host.

<integer>                   Integers may optionally be preceded by a
                            plus or minus sign, and by an H or X
                            (hexadecimal), 0 (octal), or D (decimal)
                            to specify the radix used. Decimal is
                            the default radix and positive the default
                            sign.



Faeh                                                            [Page 3]



RFC 437           DATA RECONFIGURATION SERVICE AT UCSB         June 1973


<job name>                  Job name is a character string whose
                            maximum length is 6, and whose first
                            character is alphabetic.

<password>                  The currently acceptable password is
                            'ARPA'.

<socket number>             Socket numbers are specified as <integer>
                            (see above).

<tty list>                  TTY List is one or more TTY numbers,
                            separated by commas.


<tty no.>                   TTY number is an integer representing a
                            DRS terminal identification number.


<userid>                    User ID is a character string whose
                            maximum length is 8, and whose first
                            character is alphabetic.

Command Descriptions:

   'ATTACH' <tty no.> <password> <CA>

   Connects the user's console to the DRS/TTS terminal with
   identification number <tty no.>. Terminal <tty no.> must have been
   previously detached, and must not have been deleted. (Currently,
   detached terminals are deleted after 1 hour.)

   'BREAK' (<tty list>|<CA>) <CA>

   Causes links to the terminals specified in <tty list> to be broken.
   If <tty list> is not specified, all established links are broken.
   (See 'LINK', 'MONITOR', and 'SELECT' for a description of how links
   are established.)

   'COMPILE' <job name> formid> <CA>

   Causes form <formid> to be compiled.  Verification that the source
   for form <formid> exists, and that object code does not already exist
   is made before invoking the DRS Compiler, which executes
   asynchronously to the user's terminal.  The DRS Compiler generates a
   diagnostic file for the form and, if no errors are encountered,
   object files. <job name> is used to identify the request and may not
   be used to identify any other job so long as the current request is
   outstanding.



Faeh                                                            [Page 4]



RFC 437           DATA RECONFIGURATION SERVICE AT UCSB         June 1973


   Because of main storage requirements, only one compilation is allowed
   in execution at any time.  Subsequent requests are queued for later
   execution unless the request queue is full, in which case the request
   is refused.  The user is notified when his compilation is initiated,
   and when it terminates.

   'CONVERT' <integer> ['TO'] <base> <CA>

   Allows the user to convert octal, decimal, or hexadecimal integers
   from one radix to another. <base> specifies the desired radix of the
   result and may be 'OCTAL', DECIMAL', or 'HEXADECIMAL'.

   'DEFINE' <formid> <CA>

   Allows the user to define a new source form, or append to an existing
   source form.  The new line indicator '$$' replaces the normal '$' to
   indicate that input will be used to define the source form.  Control
   C (ETX) signals the end of form definition and elicits the normal '$'
   new line indicator.

   Unfortunately, the current facilities for editing forms are extremely
   limited.  Only the line currently being entered may be edited.  Once
   a line has been terminated, with CR-LF, and the new line indicator
   has appeared, the line may not be edited.  The following control
   characters may be used to edit a form while it is being defined.
   Control A (SOH) or Rubout (DEL) delete the last character, control X
   (CAN) deletes the entire line, and control F (ACK) displays the
   entire line.  If modifications need to be made to lines other than
   the current line, the entire form must be deleted and reentered.

   'DELETE' [<file type>] <formid> <CA>

   Deletes the specified component file(s) of form <formid>. <file type>
   specifies the component file to be deleted, either 'SOURCE',
   'DIAGNOSTIC', or 'OBJECT_CODE'.  If <file type> is not specified, all
   components of the form are deleted.

   'DETACH' <CA> <CA>

   Breaks the TELNET connection between DRS and the user, but does not
   delete the user's DRS terminal for some fixed period of time,
   currently 1 hour.  Any jobs the terminal has active are unaffected
   when the terminal is detached.  The user may subsequently reconnect
   to his DRS terminal by using the 'ATTACH' command.







Faeh                                                            [Page 5]



RFC 437           DATA RECONFIGURATION SERVICE AT UCSB         June 1973


   'DIRECTORY' <formid> <CA>

   Lists which component(s) of form <formid> exist.  A complete form
   consists of 'SOURCE', 'DIAGNOSTICS', and 'OBJECT_CODE' files.

   'DISCONNECT' <CA> <CA>

   Breaks the TELNET connection between DRS and the user and deletes the
   user's DRS terminal.  Any jobs the terminal has active are purged.

   'FULLDUPLEX' <CA>

   Directs DRS to echo user input; nullifies a previous
   'LINE_AT_A_TIME' command.

   'HALFDUPLEX' <CA>

   Directs DRS not to echo user input nullifies a previous
   'LINE_AT_A_TIME' command.

   'HELP' <CA>

   Lists the DRS control characters and their meanings.

   'LINE_AT_A_TIME' <CA>

   Tells DRS that the user is operating in line_at_a_time mode, and
   nullifies a previous 'FULLDUPLEX' or 'HALFDUPLEX' command.  DRS will
   not send any output to the user while he is inputting commands.

   'LINK' ('ENABLE'|'DISABLE'|<tty list>|<CA>) <CA>

   The link command may be used to enable or disable links to other
   terminals, or to establish links between terminals.

   'LINK' 'ENABLE' <CA> directs DRS to allow subsequent request by other
   terminals to establish links with the user's terminal.

   'LINK' 'DISABLE' <CA> directs DRS to refuse subsequent request by
   other terminals to establish links with the user's terminal.

   'LINK' (<tty list>|<CA>) <CA> requests DRS to establish bidirectional
   links between the user's terminal and the terminals specified in <tty
   list>.  If <tty list> is omitted, DRS attempts to link the user's
   terminal to all other active terminals.  While the user's terminal is






Faeh                                                            [Page 6]



RFC 437           DATA RECONFIGURATION SERVICE AT UCSB         June 1973


   linked to another terminal, all output to the user's terminal will
   also be routed to the linked terminal, and all output to the linked
   terminal will also be routed to the user's terminal.  Unidirectional
   links may be established via the 'MONITOR' and 'SELECT' commands.

   'LIST' [<file type>] <formid> <CA>

   Lists the contents of the <file type> file of form <formid>. <file
   type> may be 'SOURCE', 'DIAGNOSTIC' or 'OBJECT_CODE', and defaults to
   'SOURCE'.

   'LOGIN' <userid> <password> <acct no.> <CA>

   Logs the user in, enables job-oriented commands, and specifies the
   account to which the use of DRS is to be billed.  Currently billing
   for DRS is not implemented, and <userid> and <acct no.> may be
   arbitrarily chosen by the user.  When billing for DRS is implemented,
   user ID's and account numbers will be assigned and checked for
   validity at login.  The only currently acceptable <password> is
   'ARPA'.

   'LOGOUT' <CA>

   Logs the user out and disables job-oriented commands and billing of
   subsequent activity to the previously specified accounting
   parameters.  As with 'DISCONNECT', any jobs the terminal has active
   are purged.

   'MONITOR' (<tty list>|<CA>)  <CA>

   Requests DRS to establish unidirectional links between the user's
   terminal and the terminals specified in <tty list>.  If <tty list> is
   omitted, DRS attempts to link the user's terminal to all other active
   terminals.  While the user's terminal is monitoring another terminal,
   all output to that terminal will also be routed to the user's
   terminal.

   'QUIT' (<job name>|<CA>)  <CA>

   Requests DRS to purge the job (request for compilation or
   interpreting) identified by <job name>.  If <job name> is omitted,
   all active jobs are purged.

   'RADIX' <base> <CA>

   Allows the user to specify the radix to be used for subsequent
   integer display. <base> may be 'OCTAL', 'DECIMAL', or 'HEXADECIMAL'.
   The default display radix is decimal.



Faeh                                                            [Page 7]



RFC 437           DATA RECONFIGURATION SERVICE AT UCSB         June 1973


   'RENAME' <formid> ["TO'] <formid> <CA>

   Allows the user to rename a form.  The names of all components of the
   form specified by the first <formid> are changed to correspond to the
   second <formid>.  If the form specified by the second <formid>
   already exists, no change of name occurs, and the user is notified.

   'RESPONSE' ('ALL'|'HANDHOLD'|'PROMPT'|'NORMAL'|'UNUSUAL'| 'ERRORS'|
   'NONE') <CA>

   Allows the user to specify the level of messages the system should
   provide.  The default response level is 'ALL'.

   'RUN' <job name> ('SIMPLEX' <run parameters>|'DUPLEX' '(' <run
   parameters> <run parameters> ')') <CA>

   Causes DRS to establish the requested Network connections and direct
   the DRS interpreter to apply the specified form(s) to data passing
   over the connections.  The user first specifies the job name by which
   his request will be identified, and second whether simplex or duplex
   Network connections are to be established. 'SIMPLEX' implies that a
   single unidirectional message path is to be employed, and requires
   one set of <run parameters>. 'DUPLEX' implies that two message paths
   will be employed are requires two sets of <run parameters>. < run
   parameters> specify the data necessary to establish a Network
   connection, time limits for the DRS interpreter, and the form which
   is to be applied to the Network data stream.

   <run parameters> = ('SICP' <socket number>|'UICP' [<hostid>]
                      <socket number>|'RFC'  [<hostid>] <socket
                      number> [<hostid>] <socket number>)
                      ['BYTE_SIZE' <integer>] ['CONNECT_TIME'
                      <integer>] ['RUN_TIME' <integer>] <formid>

   Three methods are available for establishing Network connections:
   'SICP', 'UICP', and 'RFC'. 'SICP (Server Initial Connection Protocol)
   and 'UICP' causes DRS to simulate a server process addressable
   through socket <socket number> at UCSB and wait for a user process to
   connect to it. 'UICP' directs DRS to simulate a user process and
   connect to the server addressable through Host <hostid>, socket
   <socket number>. 'RFC' directs DRS to connect directly to the two
   sockets specified.  In the case of 'RFC', one of the two sockets
   specified must be a send socket, and the other must be a receive
   socket. <hostid> defaults to the Host from which the user logged into
   the DRS/TSS.






Faeh                                                            [Page 8]



RFC 437           DATA RECONFIGURATION SERVICE AT UCSB         June 1973


   The remaining fields in <run parameters> are defined as follows:

   'BYTE_SIZE' <integer>     specifies the byte size to be used, and
                             defaults to 8.

   'CONNECT_TIME' <integer>  specifies the amount of time, in seconds,
                             that DRS should wait for the connection to
                             be established. The default value is 30
                             seconds.

   'RUN_TIME' <integer>      specifies the maximum amount of time, in
                             seconds, that DRS interpreter will be
                             allowed to execute. The default value for
                             'RUN_TIME' is five minutes.

   <formid>                  specifies the form which is to be applied
                             to the Network data stream.

   For each instance of <run parameters>, one socket pair is allocated
   and one form is specified.  In the case of 'SIMPLEX' runs, the
   Network data flows between these two sockets, with the form being
   applied to the data.  In the case of 'DUPLEX' runs, the connections
   are somewhat more complex.  For 'DUPLEX' runs, two sets of <run
   parameters> are specified, causing two socket pairs to be allocated,
   and two forms to be specified.  Call these send socket 1, receive
   socket 1, and form 1 (established via the first set of <run
   parameters> and send socket 2, receive socket 2, and form 2
   (established via the second set of parameters).  When interpreting
   begins, data will flow from send socket 1, through form1, to receive
   socket 2, and from send socket 2, through form 2, to receive socket
   1. (Note that without this socket switching, processes would be
   connected to themselves when 'SICP' or 'UICP' is specified.)

   The user is notified when his requests for connections are initiated
   and when the interpreter begins applying a form to a connection.
   When execution of a form terminates, the user is supplied with a
   diagnostic message provided by the interpreter as well as the actual
   run time of the interpreter.

   'SELECT' (<tty list>|<CA>) <CA>

   Requests DRS to establish unidirectional links between the user's
   terminal and the terminals specified in <tty list>.  If <tty list> is
   omitted, DRS attempts to link the user's terminal to all other active







Faeh                                                            [Page 9]



RFC 437           DATA RECONFIGURATION SERVICE AT UCSB         June 1973


   terminals.  While the user's terminal has another terminal selected,
   all output to the user'S terminal will also be routed to the selected
   terminal.

   ';' <text> <CA>

   Allows the user to enter any comments he chooses. <text> may include
   the characters '?', and '.'.  Note that <CA> must be CR-LF, rather
   than period.


          [This RFC was put into machine readable form for entry]
    [into the online RFC archives by Helene Morin, Via Genie, 12/1999]






































Faeh                                                           [Page 10]



©2018 Martin Webb