Home Articles FAQs XREF Games Software Instant Books BBS About FOLDOC RFCs Feedback Sitemap
irt.Org

Request For Comments - RFC4559

You are here: irt.org | RFCs | RFC4559 [ previous next ]






Network Working Group                                      K. Jaganathan
Request for Comments: 4559                                        L. Zhu
Category: Informational                                        J. Brezak
                                                   Microsoft Corporation
                                                               June 2006


           SPNEGO-based Kerberos and NTLM HTTP Authentication
                          in Microsoft Windows


Status of This Memo

   This memo provides information for the Internet community.  It does
   not specify an Internet standard of any kind.  Distribution of this
   memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2006).

Abstract

   This document describes how the Microsoft Internet Explorer (MSIE)
   and Internet Information Services (IIS) incorporated in Microsoft
   Windows 2000 use Kerberos for security enhancements of web
   transactions.  The Hypertext Transport Protocol (HTTP) auth-scheme of
   "negotiate" is defined here; when the negotiation results in the
   selection of Kerberos, the security services of authentication and,
   optionally, impersonation (the IIS server assumes the windows
   identity of the principal that has been authenticated) are performed.
   This document explains how HTTP authentication utilizes the Simple
   and Protected GSS-API Negotiation mechanism.  Details of Simple And
   Protected Negotiate (SPNEGO) implementation are not provided in this
   document.

Table of Contents

   1. Introduction ....................................................2
   2. Conventions Used in This Document ...............................2
   3. Access Authentication ...........................................2
      3.1. Reliance on the HTTP/1.1 Specification .....................2
   4. HTTP Negotiate Authentication Scheme ............................2
      4.1. The WWW-Authenticate Response Header .......................2
   5. Negotiate Operation Example .....................................4
   6. Security Considerations .........................................5
   7. Normative References ............................................6




Jaganathan, et al.           Informational                      [Page 1]



RFC 4559        HTTP Authentication in Microsoft Windows       June 2006


1.  Introduction

   Microsoft has provided support for Kerberos authentication in
   Microsoft Internet Explorer (MSIE) and Internet Information Services
   (IIS), in addition to other mechanisms.  This provides the benefits
   of the Kerberos v5 protocol for Web applications.

   Support for Kerberos authentication is based on other previously
   defined mechanisms, such as SPNEGO Simple And Protected Negotiate
   (SPNEGO) [RFC4178] and the Generic Security Services Application
   Program Interface(GSSAPI).

2.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" are to
   be interpreted as described in [RFC2119].

3.  Access Authentication

3.1.  Reliance on the HTTP/1.1 Specification

   This specification is a companion to the HTTP/1.1 specification
   [RFC2616], and it builds on the authentication mechanisms defined in
   [RFC2617].  It uses the augmented BNF section of that document (2.1),
   and it relies on both the non-terminals defined in that document and
   other aspects of the HTTP/1.1 specification.

4.  HTTP Negotiate Authentication Scheme

   Use of Kerberos is wrapped in an HTTP auth-scheme of "Negotiate".
   The auth-params exchanged use data formats defined for use with the
   GSS-API [RFC2743].  In particular, they follow the formats set for
   the SPNEGO [RFC4178] and Kerberos [RFC4121] mechanisms for GSSAPI.
   The "Negotiate" auth-scheme calls for the use of SPNEGO GSSAPI tokens
   that the specific mechanism type specifies.

   The current implementation of this protocol is limited to the use of
   SPNEGO with the Kerberos and Microsoft(NT Lan Manager) NTLM
   protocols.

4.1.  The WWW-Authenticate Response Header

   If the server receives a request for an access-protected object, and
   if an acceptable Authorization header has not been sent, the server
   responds with a "401 Unauthorized" status code, and a "WWW-
   Authenticate:" header as per the framework described in [RFC2616].
   The initial WWW-Authenticate header will not carry any gssapi-data.



Jaganathan, et al.           Informational                      [Page 2]



RFC 4559        HTTP Authentication in Microsoft Windows       June 2006


   The negotiate scheme will operate as follows:

           challenge       = "Negotiate" auth-data
           auth-data       = 1#( [gssapi-data] )

   The meanings of the values of the directives used above are as
   follows:

   gssapi-data

   If the gss_accept_security_context returns a token for the client,
   this directive contains the base64 encoding of an
   initialContextToken, as defined in [RFC2743].  This is not present in
   the initial response from the server.

   A status code 200 status response can also carry a "WWW-Authenticate"
   response header containing the final leg of an authentication.  In
   this case, the gssapi-data will be present.  Before using the
   contents of the response, the gssapi-data should be processed by
   gss_init_security_context to determine the state of the security
   context.  If this function indicates success, the response can be
   used by the application.  Otherwise, an appropriate action, based on
   the authentication status, should be taken.

   For example, the authentication could have failed on the final leg if
   mutual authentication was requested and the server was not able to
   prove its identity.  In this case, the returned results are suspect.
   It is not always possible to mutually authenticate the server before
   the HTTP operation.  POST methods are in this category.

   When the Kerberos Version 5 GSSAPI mechanism [RFC4121] is being used,
   the HTTP server will be using a principal name of the form of
   "HTTP/hostname".

4.2.  The Authorization Request Header

   Upon receipt of the response containing a "WWW-Authenticate" header
   from the server, the client is expected to retry the HTTP request,
   passing a HTTP "Authorization" header line.  This is defined
   according to the framework described in [RFC2616] and is utilized as
   follows:

           credentials             = "Negotiate" auth-data2
           auth-data2              = 1#( gssapi-data )

   gssapi-data





Jaganathan, et al.           Informational                      [Page 3]



RFC 4559        HTTP Authentication in Microsoft Windows       June 2006


   This directive contains the base64 encoding of an
   InitialContextToken, as defined in [RFC2743].

   Any returned code other than a success 2xx code represents an
   authentication error.  If a 401 containing a "WWW-Authenticate"
   header with "Negotiate" and gssapi-data is returned from the server,
   it is a continuation of the authentication request.

   A client may initiate a connection to the server with an
   "Authorization" header containing the initial token for the server.
   This form will bypass the initial 401 error from the server when the
   client knows that the server will accept the Negotiate HTTP
   authentication type.

5.  Negotiate Operation Example

   The client requests an access-protected document from server via a
   GET method request.  The URI of the document is
   "http://www.nowhere.org/dir/index.html".

           C: GET dir/index.html

   The first time the client requests the document, no Authorization
   header is sent, so the server responds with

           S: HTTP/1.1 401 Unauthorized
           S: WWW-Authenticate: Negotiate

   The client will obtain the user credentials using the SPNEGO GSSAPI
   mechanism type to identify generate a GSSAPI message to be sent to
   the server with a new request, including the following Authorization
   header:

           C: GET dir/index.html
           C: Authorization: Negotiate a87421000492aa874209af8bc028

   The server will decode the gssapi-data and pass this to the SPNEGO
   GSSAPI mechanism in the gss_accept_security_context function.  If the
   context is not complete, the server will respond with a 401 status
   code with a WWW-Authenticate header containing the gssapi-data.

           S: HTTP/1.1 401 Unauthorized
           S: WWW-Authenticate: Negotiate 749efa7b23409c20b92356

   The client will decode the gssapi-data, pass this into
   Gss_Init_security_context, and return the new gssapi-data to the
   server.




Jaganathan, et al.           Informational                      [Page 4]



RFC 4559        HTTP Authentication in Microsoft Windows       June 2006


           C: GET dir/index.html
           C: Authorization: Negotiate 89a8742aa8729a8b028

   This cycle can continue until the security context is complete.  When
   the return value from the gss_accept_security_context function
   indicates that the security context is complete, it may supply final
   authentication data to be returned to the client.  If the server has
   more gssapi data to send to the client to complete the context, it is
   to be carried in a WWW-Authenticate header with the final response
   containing the HTTP body.

           S: HTTP/1.1 200 Success
           S: WWW-Authenticate: Negotiate ade0234568a4209af8bc0280289eca

   The client will decode the gssapi-data and supply it to
   gss_init_security_context using the context for this server.  If the
   status is successful from the final gss_init_security_context, the
   response can be used by the application.

6.  Security Considerations

   The SPNEGO HTTP authentication facility is only used to provide
   authentication of a user to a server.  It provides no facilities for
   protecting the HTTP headers or data including the Authorization and
   WWW-Authenticate headers that are used to implement this mechanism.

   Alternate mechanisms such as TLS can be used to provide
   confidentiality.  Hashes of the TLS certificates can be used as
   channel bindings to secure the channel.  In this case clients would
   need to enforce that the channel binding information is valid.  Note
   that Kerb-TLS [RFC2712] could be used to provide both authentication
   and confidentiality, but this requires a change to the TLS provider.

   This mechanism is not used for HTTP authentication to HTTP proxies.

   If an HTTP proxy is used between the client and server, it must take
   care to not share authenticated connections between different
   authenticated clients to the same server.  If this is not honored,
   then the server can easily lose track of security context
   associations.  A proxy that correctly honors client to server
   authentication integrity will supply the "Proxy-support:  Session-
   Based-Authentication" HTTP header to the client in HTTP responses
   from the proxy.  The client MUST NOT utilize the SPNEGO HTTP
   authentication mechanism through a proxy unless the proxy supplies
   this header with the "401 Unauthorized" response from the server.






Jaganathan, et al.           Informational                      [Page 5]



RFC 4559        HTTP Authentication in Microsoft Windows       June 2006


   When using the SPNEGO HTTP authentication facility with client-
   supplied data such as PUT and POST, the authentication should be
   complete between the client and server before sending the user data.
   The return status from the gss_init_security_context will indicate
   that the security context is complete.  At this point, the data can
   be sent to the server.

7.  Normative References

   [RFC2743]  Linn, J., "Generic Security Service Application Program
              Interface Version 2", 2, Update 1", 2743, January 2000.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC4178] Zhu, L., Leach, P., Jaganathan, K., and W. Ingersoll, "The
              Simple and Protected GSS-API Generic Security Service
              Application Program Interface (GSS-API) Negotiation
              Mechanism", 4178, October 2005.

   [RFC2616]  Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
              Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.

   [RFC2617]  Franks, J., Hallam-Baker, P., Hostetler, J., Lawrence, S.,
              Leach, P., Luotonen, A., and L. Stewart, "HTTP
              Authentication: Basic and Digest Access Authentication",
              RFC 2617, June 1999.

   [RFC2712]  Medvinsky, A. and M. Hur, "Addition of Kerberos Cipher
              Suites to Transport Layer Security (TLS)", RFC 2712,
              October 1999.

   [RFC4121]  Zhu, L., Jaganathan, K., and S. Hartman, "The Kerberos
              Version 5 Generic Security Service Application Program
              Interface (GSS-API) Mechanism: Version 2", RFC 4121, July
              2005.














Jaganathan, et al.           Informational                      [Page 6]



RFC 4559        HTTP Authentication in Microsoft Windows       June 2006


Authors' Addresses

   Karthik Jaganathan
   Microsoft Corporation
   One Microsoft Way
   Redmond, WA  98052
   US

   EMail: karthikj@microsoft.com


   Larry Zhu
   Microsoft Corporation
   One Microsoft Way
   Redmond, WA  98052
   US

   EMail: lzhu@microsoft.com


   John Brezak
   Microsoft Corporation
   One Microsoft Way
   Redmond, WA  98052
   US

   EMail: jbrezak@microsoft.com
























Jaganathan, et al.           Informational                      [Page 7]



RFC 4559        HTTP Authentication in Microsoft Windows       June 2006


Full Copyright Statement

   Copyright (C) The Internet Society (2006).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78 and at www.rfc-editor.org/copyright.html, and
   except as set forth therein, the authors retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is provided by the IETF
   Administrative Support Activity (IASA).







Jaganathan, et al.           Informational                      [Page 8]



©2018 Martin Webb